Hi Markus,
I Moved from the old em28xx-dvb-experimental to the new em28xx-new drivers.
The good news is that the analog doesn't freeze tvtime anymore.
The bad news are that DVB doesn't work as fine as before. I have image
freeze and frame losts very more often than before, as if the signal is
less good. On another hand the image on the analog part is not correct.
I joined a tvtime screenshot (You can find it on emails blocked by the
mailing list server).
I suppose both problems can be related to the firmware version. With the
old version I chosed the firmware version by myself, but know I can't
understand how to change the firmware to be loaded into the adapter.
Thanks a lot for all your work and for your support.
If you need any information I'm at your disposal.
Sébastien
[EMAIL PROTECTED]:~$ uname -a
Linux jupiter.audreyetseb.org 2.6.25-2-amd64 #1 SMP Mon Jul 14 11:05:23
UTC 2008 x86_64 GNU/Linux
[EMAIL PROTECTED]:~$ lsusb
Bus 005 Device 004: ID 13fd:2040 Initio Corporation
Bus 005 Device 002: ID 0ccd:004c TerraTec Electronic GmbH
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Me TV-Message: message d'exception: 'Timeout durant le contact du
démultiplexeur'
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-2-amd64 (Debian 2.6.25-7) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Mon Jul 14 11:05:23 UTC 2008
[ 0.000000] Command line: root=/dev/sda1 ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
[ 0.000000] BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FA8B0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 1FF30000, 0030 (r1 A M I OEMRSDT 8000403 MSFT 97)
[ 0.000000] ACPI: FACP 1FF30200, 0081 (r1 A M I OEMFACP 8000403 MSFT 97)
[ 0.000000] ACPI: DSDT 1FF303E0, 374D (r1 A0058 A0058002 2 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FF40000, 0040
[ 0.000000] ACPI: APIC 1FF30390, 004A (r1 A M I OEMAPIC 8000403 MSFT 97)
[ 0.000000] ACPI: OEMB 1FF40040, 003F (r1 A M I OEMBIOS 8000403 MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000001ff30000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 130864) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001ff30000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000011fff]
[ 0.000000] bootmap [0000000000012000 - 0000000000015fe7] pages 4
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[ 0.000000] early res: 2 [200000-63d2f7] TEXT DATA BSS
[ 0.000000] early res: 3 [1f8d9000-1ff1f868] RAMDISK
[ 0.000000] early res: 4 [9fc00-a0bff] EBDA
[ 0.000000] early res: 5 [8000-afff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 130864
[ 0.000000] On node 0 totalpages: 130767
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1094 pages reserved
[ 0.000000] DMA zone: 2849 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1733 pages used for memmap
[ 0.000000] DMA32 zone: 125035 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 35096 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127884
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2002.556 MHz processor.
[ 0.003224] Console: colour VGA+ 80x25
[ 0.003228] console [tty0] enabled
[ 0.003253] Checking aperture...
[ 0.003256] Node 0: aperture @ f8000000 size 64 MB
[ 0.004000] Memory: 503928k/523456k available (2184k kernel code, 19140k reserved, 1012k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084008] Calibrating delay using timer specific routine.. 4010.06 BogoMIPS (lpj=8020121)
[ 0.084062] Security Framework initialized
[ 0.084071] SELinux: Disabled at boot.
[ 0.084075] Capability LSM initialized
[ 0.084156] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.084673] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.084910] Mount-cache hash table entries: 256
[ 0.085097] Initializing cgroup subsys ns
[ 0.085102] Initializing cgroup subsys cpuacct
[ 0.085123] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.085125] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.085128] CPU 0/0 -> Node 0
[ 0.085151] SMP alternatives: switching to UP code
[ 0.086416] Freeing SMP alternatives: 23k freed
[ 0.086430] ACPI: Core revision 20070126
[ 0.135595] Using local APIC timer interrupts.
[ 0.136009] APIC timer calibration result 12515993
[ 0.136011] Detected 12.515 MHz APIC timer.
[ 0.136082] Brought up 1 CPUs
[ 0.136345] CPU0 attaching sched-domain:
[ 0.136348] domain 0: span 00000001
[ 0.136350] groups: 00000001
[ 0.136584] net_namespace: 1016 bytes
[ 0.136588] Booting paravirtualized kernel on bare hardware
[ 0.136804] NET: Registered protocol family 16
[ 0.137011] ACPI: bus type pci registered
[ 0.137095] PCI: Using configuration type 1
[ 0.139481] ACPI: EC: Look up EC in DSDT
[ 0.143835] ACPI: Interpreter enabled
[ 0.143838] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.143854] ACPI: Using IOAPIC for interrupt routing
[ 0.150570] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.151115] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.151312] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157383] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.157483] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.157581] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.157678] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.157776] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.157873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.157970] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.158068] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.158201] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.158231] pnp: PnP ACPI init
[ 0.158240] ACPI: bus type pnp registered
[ 0.158413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158472] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.158535] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.158664] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.158723] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.159296] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.160003] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.160246] 00:07: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.160308] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.160433] 00:08: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.160480] pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161009] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.161543] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.161805] 00:0b: calling quirk 0xffffffff8035ba3a: quirk_system_pci_resources+0x0/0x173()
[ 0.161854] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.162142] pnp: PnP ACPI: found 12 devices
[ 0.162144] ACPI: ACPI bus type pnp unregistered
[ 0.162348] usbcore: registered new interface driver usbfs
[ 0.162409] usbcore: registered new interface driver hub
[ 0.162451] usbcore: registered new device driver usb
[ 0.162593] PCI: Using ACPI for IRQ routing
[ 0.162596] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.162605] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 0.172038] agpgart: Detected AGP bridge 0
[ 0.172038] agpgart: AGP aperture is 64M @ 0xf8000000
[ 0.172038] ACPI: RTC can wake from S4
[ 0.184058] pnp: the driver 'system' has been registered
[ 0.184058] system 00:07: ioport range 0x295-0x296 has been reserved
[ 0.184058] system 00:07: ioport range 0x3e1-0x3e7 has been reserved
[ 0.184058] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.184058] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.184058] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.184058] system 00:07: driver attached
[ 0.184058] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.184058] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.184058] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.184058] system 00:08: driver attached
[ 0.184058] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.184058] system 00:0b: iomem range 0xc0000-0xdffff has been reserved
[ 0.184058] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.184058] system 00:0b: iomem range 0x100000-0x1ffeffff could not be reserved
[ 0.184058] system 00:0b: iomem range 0x0-0x0 could not be reserved
[ 0.184058] system 00:0b: driver attached
[ 0.184058] PCI: Bridge: 0000:00:01.0
[ 0.184058] IO window: disabled.
[ 0.184058] MEM window: 0xf5500000-0xf76fffff
[ 0.184058] PREFETCH window: 0x00000000e5200000-0x00000000f53fffff
[ 0.184058] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.184058] NET: Registered protocol family 2
[ 0.222985] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.222985] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.222985] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.222985] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.222985] TCP reno registered
[ 0.234989] checking if image is initramfs... it is
[ 0.687030] Switched to high resolution mode on CPU 0
[ 0.730959] Freeing initrd memory: 6426k freed
[ 0.737588] audit: initializing netlink socket (disabled)
[ 0.737604] type=2000 audit(1219773253.732:1): initialized
[ 0.737714] Total HugeTLB memory allocated, 0
[ 0.737804] VFS: Disk quotas dquot_6.5.1
[ 0.737833] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.737927] io scheduler noop registered
[ 0.737929] io scheduler anticipatory registered
[ 0.737931] io scheduler deadline registered
[ 0.737941] io scheduler cfq registered (default)
[ 0.737948] PCI: VIA PCI bridge detected. Disabling DAC.
[ 0.738037] pci 0000:01:00.0: Boot video device
[ 0.740718] Real Time Clock Driver v1.12ac
[ 0.740806] Linux agpgart interface v0.103
[ 0.740808] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.740933] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.741030] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.741199] pnp: the driver 'serial' has been registered
[ 0.741379] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.741419] serial 00:09: driver attached
[ 0.741521] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.741559] serial 00:0a: driver attached
[ 0.742333] brd: module loaded
[ 0.742411] input: Macintosh mouse button emulation as /class/input/input0
[ 0.742519] pnp: the driver 'i8042 kbd' has been registered
[ 0.742555] pnp: the driver 'i8042 aux' has been registered
[ 0.742616] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.742647] pnp: the driver 'i8042 aux' has been unregistered
[ 0.742649] PNP: No PS/2 controller found. Probing ports directly.
[ 0.743051] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.743056] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.755051] mice: PS/2 mouse device common for all mice
[ 0.755051] cpuidle: using governor ladder
[ 0.755051] cpuidle: using governor menu
[ 0.755051] TCP cubic registered
[ 0.755051] NET: Registered protocol family 1
[ 0.755051] NET: Registered protocol family 17
[ 0.755051] registered taskstats version 1
[ 0.755051] Freeing unused kernel memory: 372k freed
[ 1.877102] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.402095] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.420802] No dock devices found.
[ 2.438073] SCSI subsystem initialized
[ 2.479088] Uniform Multi-Platform E-IDE driver
[ 2.479093] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.479506] libata version 3.00 loaded.
[ 2.481958] firewire_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
[ 2.482058] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 2.482070] PCI: Disallowing DAC for device 0000:00:0a.0
[ 2.482097] skge 1.13 addr 0xf7e00000 irq 17 chip Yukon-Lite rev 7
[ 2.482398] skge eth0: addr 00:0e:a6:82:5f:ea
[ 2.494074] USB Universal Host Controller Interface driver v3.0
[ 2.494139] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.494151] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.494300] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 2.494335] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 2.494478] usb usb1: configuration #1 chosen from 1 choice
[ 2.494504] hub 1-0:1.0: USB hub found
[ 2.494513] hub 1-0:1.0: 2 ports detected
[ 2.598059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.598063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.598066] usb usb1: Product: UHCI Host Controller
[ 2.598068] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.598070] usb usb1: SerialNumber: 0000:00:10.0
[ 2.598118] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 2.598130] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.598189] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 2.598214] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 2.598332] usb usb2: configuration #1 chosen from 1 choice
[ 2.598359] hub 2-0:1.0: USB hub found
[ 2.598369] hub 2-0:1.0: 2 ports detected
[ 2.679703] Floppy drive(s): fd0 is 1.44M
[ 2.697814] FDC 0 is a post-1991 82077
[ 2.702070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.702075] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.702077] usb usb2: Product: UHCI Host Controller
[ 2.702079] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.702081] usb usb2: SerialNumber: 0000:00:10.1
[ 2.702124] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 2.702135] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.702200] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 2.702225] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 2.702340] usb usb3: configuration #1 chosen from 1 choice
[ 2.702368] hub 3-0:1.0: USB hub found
[ 2.702377] hub 3-0:1.0: 2 ports detected
[ 2.812799] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.812799] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.812799] usb usb3: Product: UHCI Host Controller
[ 2.812799] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.812799] usb usb3: SerialNumber: 0000:00:10.2
[ 2.812799] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 2.812799] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.812799] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 2.812799] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 2.812799] usb usb4: configuration #1 chosen from 1 choice
[ 2.812799] hub 4-0:1.0: USB hub found
[ 2.812799] hub 4-0:1.0: 2 ports detected
[ 2.848580] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 2.922428] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.922431] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.922434] usb usb4: Product: UHCI Host Controller
[ 2.922436] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 2.922437] usb usb4: SerialNumber: 0000:00:10.3
[ 2.922487] sata_via 0000:00:0f.0: version 2.3
[ 2.922507] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
[ 2.922553] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 2.922658] scsi0 : sata_via
[ 2.924188] scsi1 : sata_via
[ 2.924244] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
[ 2.924247] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
[ 2.994177] firewire_core: created device fw0: GUID 00e01800005ae707, S400
[ 3.023568] usb 1-1: configuration #1 chosen from 1 choice
[ 3.026654] usb 1-1: New USB device found, idVendor=0ccd, idProduct=004c
[ 3.026657] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.026659] usb 1-1: Product: Cinergy Hybrid T USB XS FR
[ 3.026661] usb 1-1: Manufacturer: TerraTec Electronic GmbH
[ 3.129136] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.269806] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 3.298414] ata1.00: ATA-7: Maxtor 6B160M0, BANC1B70, max UDMA/133
[ 3.298414] ata1.00: 320173056 sectors, multi 16: LBA48 NCQ (not used)
[ 3.313986] ata1.00: configured for UDMA/133
[ 3.448798] usb 1-2: configuration #1 chosen from 1 choice
[ 3.451366] usb 1-2: New USB device found, idVendor=046d, idProduct=c517
[ 3.451371] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.451373] usb 1-2: Product: USB Receiver
[ 3.451375] usb 1-2: Manufacturer: Logitech
[ 3.519695] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.519827] scsi 0:0:0:0: Direct-Access ATA Maxtor 6B160M0 BANC PQ: 0 ANSI: 5
[ 3.519954] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 3.519971] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.520030] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 3.520075] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf7f00000
[ 3.531729] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.531878] usb usb5: configuration #1 chosen from 1 choice
[ 3.531904] hub 5-0:1.0: USB hub found
[ 3.531916] hub 5-0:1.0: 8 ports detected
[ 3.539565] Driver 'sd' needs updating - please use bus_type methods
[ 3.539662] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 3.539676] sd 0:0:0:0: [sda] Write Protect is off
[ 3.539679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.539714] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.539767] sd 0:0:0:0: [sda] 320173056 512-byte hardware sectors (163929 MB)
[ 3.539778] sd 0:0:0:0: [sda] Write Protect is off
[ 3.539780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.539797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.539800] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 3.611281] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.645841] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.645841] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.645841] usb usb5: Product: EHCI Host Controller
[ 3.645841] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 3.645841] usb usb5: SerialNumber: 0000:00:10.4
[ 3.645841] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1
[ 3.645841] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.645841] VP_IDE: not 100% native mode: will probe irqs later
[ 3.645841] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 3.645841] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:PIO, hdb:PIO
[ 3.645841] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:PIO, hdd:PIO
[ 3.645841] Probing IDE interface ide0...
[ 4.240110] Probing IDE interface ide1...
[ 4.500272] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 4.644825] usb 5-1: configuration #1 chosen from 1 choice
[ 4.644825] usb 5-1: New USB device found, idVendor=0ccd, idProduct=004c
[ 4.644825] usb 5-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 4.644825] usb 5-1: Product: Cinergy Hybrid T USB XS FR
[ 4.644825] usb 5-1: Manufacturer: TerraTec Electronic GmbH
[ 4.835991] hub 5-0:1.0: unable to enumerate USB device on port 2
[ 5.073337] usb 5-4: new high speed USB device using ehci_hcd and address 4
[ 5.202060] usb 5-4: configuration #1 chosen from 1 choice
[ 5.202060] usb 5-4: New USB device found, idVendor=13fd, idProduct=2040
[ 5.202060] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.202060] usb 5-4: Product: USB Mass Storage Device
[ 5.202060] usb 5-4: Manufacturer: TSSTcorp
[ 5.202060] usb 5-4: SerialNumber: SATAHH0000000032c9c
[ 5.202060] usb 1-1: USB disconnect, address 2
[ 5.202060] usbcore: registered new interface driver hiddev
[ 5.225993] Initializing USB Mass Storage driver...
[ 5.331879] usb 1-2: USB disconnect, address 3
[ 5.577347] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 5.756888] usb 1-2: configuration #1 chosen from 1 choice
[ 5.760410] usb 1-2: New USB device found, idVendor=046d, idProduct=c517
[ 5.760413] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.760416] usb 1-2: Product: USB Receiver
[ 5.760417] usb 1-2: Manufacturer: Logitech
[ 5.761476] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.761728] usb-storage: device found at 4
[ 5.761730] usb-storage: waiting for device to settle before scanning
[ 5.777701] input: Logitech USB Receiver as /class/input/input1
[ 5.789700] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2
[ 5.825390] Fixing up Logitech keyboard report descriptor
[ 5.825390] input: Logitech USB Receiver as /class/input/input2
[ 5.855217] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2
[ 5.855217] usbcore: registered new interface driver usbhid
[ 5.855217] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.855217] usbcore: registered new interface driver usb-storage
[ 5.855217] USB Mass Storage support registered.
[ 6.038339] PM: Starting manual resume from disk
[ 6.054918] kjournald starting. Commit interval 5 seconds
[ 6.054937] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.698805] udevd version 124 started
[ 9.453036] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.472966] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.610119] Linux video capture interface: v2.00
[ 9.663384] input: PC Speaker as /class/input/input3
[ 9.718317] input: Power Button (FF) as /class/input/input4
[ 9.743252] ACPI: Power Button (FF) [PWRF]
[ 9.743343] input: Power Button (CM) as /class/input/input5
[ 9.775268] ACPI: Power Button (CM) [PWRB]
[ 9.775357] input: Sleep Button (CM) as /class/input/input6
[ 9.807277] ACPI: Sleep Button (CM) [SLPB]
[ 9.846914] em28xx v4l2 driver version 0.0.1 loaded
[ 9.885297] <NULL>: em28xx new video device (0ccd:004c): interface 0, class 255
[ 9.885302] em28xx: device is attached to a USB 2.0 bus
[ 9.885312] em28xx #0: Alternate settings: 8
[ 9.885315] em28xx #0: Alternate setting 0, max size= 0
[ 9.885317] em28xx #0: Alternate setting 1, max size= 0
[ 9.885319] em28xx #0: Alternate setting 2, max size= 1448
[ 9.885321] em28xx #0: Alternate setting 3, max size= 2048
[ 9.885323] em28xx #0: Alternate setting 4, max size= 2304
[ 9.885326] em28xx #0: Alternate setting 5, max size= 2580
[ 9.885328] em28xx #0: Alternate setting 6, max size= 2892
[ 9.885330] em28xx #0: Alternate setting 7, max size= 3072
[ 10.727416] pnp: the driver 'parport_pc' has been registered
[ 10.727433] parport_pc 00:06: reported by Plug and Play ACPI
[ 10.727473] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 10.744832] attach_inform: tvp5150 detected.
[ 10.807813] tvp5150 1-005c: tvp5150am1 detected.
[ 10.823351] parport_pc 00:06: driver attached
[ 10.909302] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
[ 10.911294] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 11.106324] usb-storage: device scan complete
[ 11.106974] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SE-S204N TS00 PQ: 0 ANSI: 0
[ 11.477634] codec_read: codec 0 is not valid [0xfe0000]
[ 11.484276] codec_read: codec 0 is not valid [0xfe0000]
[ 11.490959] codec_read: codec 0 is not valid [0xfe0000]
[ 11.497592] codec_read: codec 0 is not valid [0xfe0000]
[ 11.666732] PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
[ 11.666739] ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
[ 11.950436] Driver 'sr' needs updating - please use bus_type methods
[ 11.956381] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 11.956387] Uniform CD-ROM driver Revision: 3.20
[ 11.956464] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 11.996230] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.996230] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 12.619554] PCI: Setting latency timer of device 0000:00:11.6 to 64
[ 12.797760] successfully attached tuner
[ 12.836441] msp3400' 1-0044: MSP3415G-B8 found @ 0x88 (em28xx #0)
[ 12.836445] msp3400' 1-0044: MSP3415G-B8 supports nicam and radio, mode is autodetect and autoselect
[ 12.836510] attach_inform: msp34xx/cx25843 detected.
[ 12.836711] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 12.855973] em28xx #0: V4L2 device registered as /dev/video0
[ 12.855973] em28xx #0: Found Terratec Hybrid XS Secam
[ 12.855973] <NULL>: em28xx audio device (0ccd:004c): interface 1, class 1
[ 12.855973] <NULL>: em28xx audio device (0ccd:004c): interface 2, class 1
[ 12.855973] usbcore: registered new interface driver em28xx
[ 12.872073] usbcore: registered new interface driver snd-usb-audio
[ 12.971836] em2880-dvb.c: DVB Init
[ 13.326227] DVB: registering new adapter (em2880 DVB-T)
[ 13.326234] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)...
[ 13.326529] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 13.326689] ACPI: PCI interrupt for device 0000:00:11.6 disabled
[ 13.326691] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 15.569063] Adding 1494004k swap on /dev/sda6. Priority:-1 extents:1 across:1494004k
[ 15.997776] EXT3 FS on sda1, internal journal
[ 16.949543] attach_inform: eeprom detected.
[ 16.980721] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 4c 00 60 12 5c 03 6a 38 a2 34
[ 16.980721] em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom 20: 4e 00 10 00 f0 10 31 88 b8 00 14 00 5b 1e 00 00
[ 16.980721] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 38 03 43 00 69 00
[ 16.980721] em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
[ 16.980721] em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
[ 16.980721] em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 20 00 46 00 52 00
[ 16.980721] em28xx #0: i2c eeprom a0: 00 00 34 03 54 00 65 00 72 00 72 00 61 00 54 00
[ 16.980721] em28xx #0: i2c eeprom b0: 65 00 63 00 20 00 45 00 6c 00 65 00 63 00 74 00
[ 16.980721] em28xx #0: i2c eeprom c0: 72 00 6f 00 6e 00 69 00 63 00 20 00 47 00 6d 00
[ 16.980721] em28xx #0: i2c eeprom d0: 62 00 48 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.980721] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 16.980721] EEPROM ID= 0x9567eb1a
[ 16.980721] Vendor/Product ID= 0ccd:004c
[ 16.980721] I2S audio, sample rate=32k
[ 16.980721] 500mA max power
[ 16.980721] Table at 0x06, strings = 0x386a, 0x34a2, 0x0000
[ 17.198120] w83627hf: Found W83697HF chip at 0x290
[ 17.588686] nvidia: module license 'NVIDIA' taints kernel.
[ 17.846651] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 17.846923] NVRM: loading NVIDIA Linux x86_64 Kernel Module 96.43.07 Wed Jul 2 12:22:43 PDT 2008
[ 17.977271] device-mapper: uevent: version 1.0.3
[ 17.978603] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: [EMAIL PROTECTED]
[ 18.741280] fuse init (API version 7.9)
[ 18.854491] kjournald starting. Commit interval 5 seconds
[ 18.854542] EXT3 FS on sda8, internal journal
[ 18.854542] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.869781] kjournald starting. Commit interval 5 seconds
[ 18.869810] EXT3 FS on sda7, internal journal
[ 18.869810] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.965163] kjournald starting. Commit interval 5 seconds
[ 18.965213] EXT3 FS on sda5, internal journal
[ 18.965213] EXT3-fs: mounted filesystem with ordered data mode.
[ 21.272672] skge eth0: enabling interface
[ 22.269797] NET: Registered protocol family 10
[ 22.270335] lo: Disabled Privacy Extensions
[ 22.270862] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.249479] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 23.251863] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 27.958009] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[ 27.958051] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2
[ 27.958054] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6
[ 27.958056] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 27.958088] powernow-k8: ph2 null fid transition 0xc
[ 34.001114] Marking TSC unstable due to cpufreq changes
[ 34.159376] eth0: no IPv6 routers present
[ 34.313232] Clocksource tsc unstable (delta = -145060464 ns)
[ 46.313668] tvp5150 1-005c: tvp5150am1 detected.
[ 49.305408] Bluetooth: Core ver 2.11
[ 49.309588] NET: Registered protocol family 31
[ 49.309593] Bluetooth: HCI device and connection manager initialized
[ 49.309597] Bluetooth: HCI socket layer initialized
[ 49.369386] Bluetooth: L2CAP ver 2.9
[ 49.369390] Bluetooth: L2CAP socket layer initialized
[ 49.456173] Bluetooth: RFCOMM socket layer initialized
[ 49.456189] Bluetooth: RFCOMM TTY layer initialized
[ 49.456191] Bluetooth: RFCOMM ver 1.8
[ 53.127896] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 55.677591] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 55.677600] agpgart: BIOS bug. AGP bridge claims to only support x4 rateFixing up support for x2 & x1
[ 55.677604] agpgart: Device is in legacy mode, falling back to 2.x
[ 55.677609] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 55.677642] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 57.255957] device eth0 entered promiscuous mode
[ 228.455587] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 228.810228] ISO 9660 Extensions: RRIP_1991A
[ 5044.470303] em28xx_dvb_init
[ 5080.763943] em28xx_dvb_init
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
