Give EMailer all the RAM you can; I suspect you are simply running out of memory.
[EMAIL PROTECTED] at [EMAIL PROTECTED] wrote on 12/27/02 2:14 PM ----- >Subject: Re: new C.E. installed/rebuilt only part.! > > >- > OK; I've finally located a source for C.E. 2.0v3. > I did the install; even going so far as to do it under >"Extensions Off". > During the first run, after going thru all the regular new app. >processes, it asked about rebuilding the database. Sure, rebuild it; I've >saved a copy on another partition. > BUT.! > During the installation, the folder update process started into its >thing and stopped not even half way thru - saying there was some kind of >problem requiring it to quit that and complete the installation. "OK" > > NOW... > None of the folders beyond that point show any contents when listed >by the application, but they do show contents from the finder level. >When in one of those finder file folders, double clicking any of msg. >icons brings up C.E.; but as far as C.E. goes is just to squalk an alert >at me. >- > I tried a reinstall -( chose 'upgrade')- the installer didn't >override the first 2.0v3 or replace it, it put a _new_ one right in the >same folder.!...? > And there was no difference in the 'personal folders' contents. > I then tried an "Option" startup database rebuild; first time : >regular; second attempt : 'advanced'. > Still can't see or open any of the larger part of this file. >- > I do still have the backup stashed safely asside; would it do any good >to try integrating the two.? How would I go about that.? >- Whatcha think.? > Any help would be greatly.....! ------------------------------------------------------------- James D. DeWitt Voice: (907) 452-8986 Icicle Software Fax: (907) 452-7015 PO Box 72750 Email: [EMAIL PROTECTED] Fairbanks, Alaska 99707 http://www.iciclesoftware.com ------------------------------------------------------------- ___________________________________________________________________________ To unsubscribe send a mail message with a SUBJECT line of "unsubscribe" to <[EMAIL PROTECTED]> or <[EMAIL PROTECTED]>
