Hi all, I see the write-up here: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2#Simulator_on_Ubu ntu_6_10_7_04_or_7_10
regarding compiling EMC2 in simulation mode under versions of Ubuntu later than 6.06. My question is, can this be used to cross-compile for Ubuntu 6.06, or is there another easier way to accomplish that? The reason I ask is, I was not able to find a compatible video driver for my new notebook computer with Ubuntu 6.06, however 7.10 loaded flawlessly. My target machine is running 6.06, but runs from a 4GB flash drive, so it does not have sufficient space for the development environment. So what I would like to be able to do, is to compile on my 7.10 laptop, and port the binaries to the 6.06 target. I expect that the user mode programs / binaries would port fine, but not sure about the real-time components. Thanks, Eric ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
