Bugs item #3106610, was opened at 2010-11-10 13:32 Message generated for change (Tracker Item Submitted) made by cyberwoodman You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3106610&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: GUI - AXIS Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Taras Koroljuk (cyberwoodman) Assigned to: Chris Radek (cradek) Summary: wrong movements on z-axis Initial Comment: I press 'esc' when M0 is the current command. Then I load next .ngc program wich consist of commands for tool length probing (G38.2, G43.1 Z[#5063-#1000] etc.), and the commands to cut the material (g1,g0, etc.). When was processed command g0 z20, z-axis go down to 2.4564 value (the same value was on the screen in AXIS gui), after that any attempts to handle the z-axis were unsuccessful. (z-axis was placed in the wrong values different from commanded) Problem has been resolved when the EMC restarted. EMC v 2.4.5 Ubuntu hadry heron 8.04 (was installed from EMC 2.3.0 installation disk) Excuse me for bad English. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3106610&group_id=6744 ------------------------------------------------------------------------------ The Next 800 Companies to Lead America's Growth: New Video Whitepaper David G. Thomson, author of the best-selling book "Blueprint to a Billion" shares his insights and actions to help propel your business during the next growth cycle. Listen Now! http://p.sf.net/sfu/SAP-dev2dev _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
