Il giorno ven, 21/01/2011 alle 13.17 +0100, Spiderdab ha scritto: > Il giorno ven, 21/01/2011 alle 13.04 +0100, Michał Geszkiewicz ha > scritto: > > Please send output from dmesg command > > > > regards > > Michael
> > Spiderdab pisze: > > > Hallo, i wish is it right to ask for this here, in case tell me. > > > i was trying to use the master branch (first time), compliled ok. > > > tryed to run my setups and had this error, also tried a couple of given > > > steups, but i still have the same error: > > > > > > dab-pod@dab-pod-desktop:~/emc2-dev/src$ > > > emc ../configs/halui_pyvcp/halui.ini > > > EMC2 - 2.5.0~pre > > > Machine configuration directory is > > > '/home/dab-pod/emc2-dev/src/../configs/halui_pyvcp' > > > Machine configuration file is 'halui.ini' > > > Starting EMC2... > > > core_sim.hal:30: Pin 'axis.0.motor-pos-cmd' does not exist > > > Shutting down and cleaning up EMC2... > > > Cleanup done > > > > > > does the pin have a new name? > > > > > > if it's so, is there a setup which to take infos from? > > > > > > thanks, davide. > > > ..and the output of dmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-122-rtai (root@moses-6core) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #rtai SMP Tue Jul 27 12:44:07 CDT 2010 (Ubuntu 2.6.32-122.35.rtai-rtai 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fe71000 (usable) [ 0.000000] BIOS-e820: 000000001fe71000 - 000000001fe73000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fe73000 - 000000001fe94000 (ACPI data) [ 0.000000] BIOS-e820: 000000001fe94000 - 000000001ff00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x1fe71 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 01FF00000 mask FFFF00000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fe71000 (usable) [ 0.000000] modified: 000000001fe71000 - 000000001fe73000 (ACPI NVS) [ 0.000000] modified: 000000001fe73000 - 000000001fe94000 (ACPI data) [ 0.000000] modified: 000000001fe94000 - 000000001ff00000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fe71000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fe71000 page 4k [ 0.000000] kernel direct mapping tables up to 1fe71000 @ 7000-c000 [ 0.000000] RAMDISK: 177b1000 - 17f13e4c [ 0.000000] ACPI: RSDP 000feba0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd501 00038 (v01 DELL GX260 00000006 ASL 00000061) [ 0.000000] ACPI: FACP 000fd539 00074 (v01 DELL GX260 00000006 ASL 00000061) [ 0.000000] ACPI: DSDT fffd5d84 02563 (v01 DELL dt_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 1fe71000 00040 [ 0.000000] ACPI: SSDT fffd82e7 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd5ad 0006C (v01 DELL GX260 00000006 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd619 00028 (v01 DELL GX260 00000006 ASL 00000061) [ 0.000000] ACPI: ASF! 000fd641 00067 (v16 DELL GX260 00000006 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 510MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fe71000 [ 0.000000] low ram: 0 - 1fe71000 [ 0.000000] node 0 low ram: 00000000 - 1fe71000 [ 0.000000] node 0 bootmap 00008000 - 0000bfd0 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fe71000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0db8] TEXT DATA BSS ==> [0000100000 - 00008b0db8] [ 0.000000] #4 [00177b1000 - 0017f13e4c] RAMDISK ==> [00177b1000 - 0017f13e4c] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008b1000 - 00008b41c4] BRK ==> [00008b1000 - 00008b41c4] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] found SMP MP-table at [c00fe710] fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fe71 [ 0.000000] HighMem 0x0001fe71 -> 0x0001fe71 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0001fe71 [ 0.000000] On node 0 totalpages: 130573 [ 0.000000] free_area_init_node: node 0, pgdat c07470e0, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3964 pages, LIFO batch:0 [ 0.000000] Normal zone: 989 pages used for memmap [ 0.000000] Normal zone: 125588 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:ded00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @c1800000 s74936 r0 d23368 u1048576 [ 0.000000] pcpu-alloc: s74936 r0 d23368 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129552 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-122-rtai root=UUID=c205a21c-0600-494b-b1e4-ffadd5e89b8f ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2613460 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 498952k/522692k available (4539k kernel code, 22924k reserved, 1928k data, 620k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0671000 - 0xff7fe000 ( 497 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfe71000 ( 510 MB) [ 0.000000] .init : 0xc0751000 - 0xc07ec000 ( 620 kB) [ 0.000000] .data : 0xc056ecbc - 0xc0750e68 (1928 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ecbc (4539 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] I-pipe 2.6-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2656.640 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5313.28 BogoMIPS (lpj=10626560) [ 0.004040] Security Framework initialized [ 0.004072] AppArmor: AppArmor initialized [ 0.004085] Mount-cache hash table entries: 512 [ 0.004303] Initializing cgroup subsys ns [ 0.004310] Initializing cgroup subsys cpuacct [ 0.004318] Initializing cgroup subsys memory [ 0.004331] Initializing cgroup subsys devices [ 0.004335] Initializing cgroup subsys freezer [ 0.004340] Initializing cgroup subsys net_cls [ 0.004374] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004380] CPU: L2 cache: 512K [ 0.004384] CPU: Hyper-Threading is disabled [ 0.004391] mce: CPU supports 4 MCE banks [ 0.004406] CPU0: Thermal monitoring enabled (TM1) [ 0.004423] Performance Events: no PMU driver, software events only. [ 0.004434] Checking 'hlt' instruction... OK. [ 0.021213] SMP alternatives: switching to UP code [ 0.033581] ACPI: Core revision 20090903 [ 0.070025] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.070037] ftrace: allocating 21003 entries in 42 pages [ 0.082536] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.082842] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.084001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.084001] ..... (found apic 0 pin 2) ... [ 0.126274] ....... works. [ 0.126278] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09 [ 0.128001] Brought up 1 CPUs [ 0.128001] Total of 1 processors activated (5313.28 BogoMIPS). [ 0.128001] CPU0 attaching NULL sched-domain. [ 0.128001] devtmpfs: initialized [ 0.128001] regulator: core version 0.5 [ 0.128001] NET: Registered protocol family 16 [ 0.128001] EISA bus registered [ 0.128001] ACPI: bus type pci registered [ 0.150229] PCI: PCI BIOS revision 2.10 entry at 0xfbdf8, last bus=1 [ 0.150233] PCI: Using configuration type 1 for base access [ 0.151353] bio: create slab <bio-0> at 0 [ 0.151940] ACPI: EC: Look up EC in DSDT [ 0.178243] ACPI: Interpreter enabled [ 0.178248] ACPI: (supports S0 S5) [ 0.178265] ACPI: Using IOAPIC for interrupt routing [ 0.206013] ACPI: No dock devices found. [ 0.206042] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.206106] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.206190] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.206198] pci 0000:00:02.0: reg 14 32bit mmio: [0xff680000-0xff6fffff] [ 0.206315] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f] [ 0.206375] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f] [ 0.206435] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f] [ 0.206503] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa00800-0xffa00bff] [ 0.206566] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.206572] pci 0000:00:1d.7: PME# disabled [ 0.206628] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.206631] * this clock source is slow. If you are sure your timer does not have [ 0.206632] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.206681] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.206686] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.206714] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.206722] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.206730] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.206738] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.206746] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.206755] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.206812] pci 0000:00:1f.3: reg 20 io port: [0xdc80-0xdc9f] [ 0.206862] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff] [ 0.206870] pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f] [ 0.206878] pci 0000:00:1f.5: reg 18 32bit mmio: [0xffa00400-0xffa005ff] [ 0.206886] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffa00000-0xffa000ff] [ 0.206919] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.206924] pci 0000:00:1f.5: PME# disabled [ 0.206998] pci 0000:01:0c.0: reg 10 32bit mmio: [0xff8e0000-0xff8fffff] [ 0.207011] pci 0000:01:0c.0: reg 18 io port: [0xecc0-0xecff] [ 0.207057] pci 0000:01:0c.0: PME# supported from D0 D3hot D3cold [ 0.207062] pci 0000:01:0c.0: PME# disabled [ 0.207098] pci 0000:00:1e.0: transparent bridge [ 0.207104] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.207110] pci 0000:00:1e.0: bridge 32bit mmio: [0xff800000-0xff9fffff] [ 0.207123] pci_bus 0000:00: on NUMA node 0 [ 0.207128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.207533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.295442] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.295777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.296209] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.296541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.296872] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.297204] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.297534] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.297868] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 0.298072] vgaarb: device added: PCI:0000:00:02.0,decodes=io +mem,owns=io+mem,locks=none [ 0.298082] vgaarb: loaded [ 0.298282] SCSI subsystem initialized [ 0.298399] libata version 3.00 loaded. [ 0.298508] usbcore: registered new interface driver usbfs [ 0.298527] usbcore: registered new interface driver hub [ 0.298564] usbcore: registered new device driver usb [ 0.298746] ACPI: WMI: Mapper loaded [ 0.298750] PCI: Using ACPI for IRQ routing [ 0.298936] NetLabel: Initializing [ 0.298940] NetLabel: domain hash size = 128 [ 0.298942] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.298962] NetLabel: unlabeled traffic allowed by default [ 0.299014] Switching to clocksource tsc [ 0.300001] AppArmor: AppArmor Filesystem Enabled [ 0.300001] pnp: PnP ACPI init [ 0.300001] ACPI: bus type pnp registered [ 0.319649] pnp 00:0a: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.319655] pnp 00:0a: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.320411] pnp: PnP ACPI: found 11 devices [ 0.320415] ACPI: ACPI bus type pnp unregistered [ 0.320422] PnPBIOS: Disabled by ACPI PNP [ 0.320439] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.320444] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.320449] system 00:00: iomem range 0x1000000-0x1fe70fff could not be reserved [ 0.320454] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.320458] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.320462] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.320467] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.320471] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved [ 0.320484] system 00:0a: ioport range 0xc00-0xc7f has been reserved [ 0.355320] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.355325] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.355332] pci 0000:00:1e.0: MEM window: 0xff800000-0xff9fffff [ 0.355337] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.355357] pci 0000:00:1e.0: setting latency timer to 64 [ 0.355364] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.355368] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.355371] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.355375] pci_bus 0000:01: resource 1 mem: [0xff800000-0xff9fffff] [ 0.355378] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.355382] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.355436] NET: Registered protocol family 2 [ 0.355589] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.355956] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.356097] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.356222] TCP: Hash tables configured (established 16384 bind 16384) [ 0.356225] TCP reno registered [ 0.356370] NET: Registered protocol family 1 [ 0.356396] pci 0000:00:02.0: Boot video device [ 0.356619] Simple Boot Flag at 0x7a set to 0x1 [ 0.356777] Scanning for low memory corruption every 60 seconds [ 0.356977] audit: initializing netlink socket (disabled) [ 0.356999] type=2000 audit(1032826091.356:1): initialized [ 0.364697] Trying to unpack rootfs image as initramfs... [ 0.373233] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.379115] VFS: Disk quotas dquot_6.5.2 [ 0.379203] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.380014] fuse init (API version 7.13) [ 0.380126] msgmni has been set to 975 [ 0.385490] alg: No test for stdrng (krng) [ 0.385653] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.385659] io scheduler noop registered [ 0.385662] io scheduler anticipatory registered [ 0.385665] io scheduler deadline registered [ 0.385720] io scheduler cfq registered (default) [ 0.385873] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.385906] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.386018] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.386033] ACPI: Power Button [VBTN] [ 0.386113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.386117] ACPI: Power Button [PWRF] [ 0.388171] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.388291] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.388729] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.390142] brd: module loaded [ 0.390756] loop: module loaded [ 0.390918] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.391084] ata_piix 0000:00:1f.1: version 2.13 [ 0.391103] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.391118] alloc irq_desc for 18 on node -1 [ 0.391121] alloc kstat_irqs on node -1 [ 0.391136] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.391222] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.391441] isapnp: Scanning for PnP cards... [ 0.401073] scsi0 : ata_piix [ 0.401284] scsi1 : ata_piix [ 0.401335] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.401339] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.401887] Fixed MDIO Bus: probed [ 0.401945] PPP generic driver version 2.4.2 [ 0.402045] tun: Universal TUN/TAP device driver, 1.6 [ 0.402048] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 0.402185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.402224] alloc irq_desc for 23 on node -1 [ 0.402228] alloc kstat_irqs on node -1 [ 0.402240] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.402266] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.402271] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.402315] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.402364] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.406238] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.453031] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa00800 [ 0.465037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.465283] usb usb1: configuration #1 chosen from 1 choice [ 0.465326] hub 1-0:1.0: USB hub found [ 0.465346] hub 1-0:1.0: 6 ports detected [ 0.465438] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.465462] uhci_hcd: USB Universal Host Controller Interface driver [ 0.465547] alloc irq_desc for 16 on node -1 [ 0.465551] alloc kstat_irqs on node -1 [ 0.465562] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.465577] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.465582] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.465638] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.465685] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 0.465820] usb usb2: configuration #1 chosen from 1 choice [ 0.465856] hub 2-0:1.0: USB hub found [ 0.465871] hub 2-0:1.0: 2 ports detected [ 0.465928] alloc irq_desc for 19 on node -1 [ 0.465931] alloc kstat_irqs on node -1 [ 0.465938] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.465947] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.465951] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.465996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.466028] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 0.466167] usb usb3: configuration #1 chosen from 1 choice [ 0.466200] hub 3-0:1.0: USB hub found [ 0.466213] hub 3-0:1.0: 2 ports detected [ 0.466267] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.466275] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.466279] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.466330] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.466362] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 0.466482] usb usb4: configuration #1 chosen from 1 choice [ 0.466517] hub 4-0:1.0: USB hub found [ 0.466532] hub 4-0:1.0: 2 ports detected [ 0.466656] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1 [ 0.466660] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.467399] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.467577] mice: PS/2 mouse device common for all mice [ 0.470679] rtc_cmos 00:05: RTC can wake from S4 [ 0.470807] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.470840] rtc0: alarms up to one day, 242 bytes nvram [ 0.471029] device-mapper: uevent: version 1.0.3 [ 0.471224] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 0.477007] device-mapper: multipath: version 1.1.0 loaded [ 0.477015] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.477320] EISA: Probing bus 0 at eisa.0 [ 0.477361] EISA: Detected 0 cards. [ 0.477366] cpuidle: using governor ladder [ 0.477369] cpuidle: using governor menu [ 0.477932] TCP cubic registered [ 0.478102] NET: Registered protocol family 10 [ 0.478719] lo: Disabled Privacy Extensions [ 0.479106] NET: Registered protocol family 17 [ 0.479162] Using IPI No-Shortcut mode [ 0.479319] registered taskstats version 1 [ 0.479606] rtc_cmos 00:05: setting system clock to 2002-09-24 00:08:12 UTC (1032826092) [ 0.479611] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.479614] EDD information not available. [ 0.501360] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.569642] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0B10, max UDMA/44 [ 0.569682] ata2.00: limited to UDMA/33 due to 40-wire cable [ 0.569801] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 0.569805] ata1.00: 160086528 sectors, multi 8: LBA [ 0.585556] ata2.00: configured for UDMA/33 [ 0.585848] ata1.00: configured for UDMA/100 [ 0.919930] Freeing initrd memory: 7563k freed [ 1.023109] isapnp: No Plug & Play device found [ 1.023393] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 1.023681] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.023934] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 1.024008] sd 0:0:0:0: [sda] Write Protect is off [ 1.024012] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.024049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.024293] sda: [ 1.026934] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0B10 PQ: 0 ANSI: 5 [ 1.034698] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.034704] Uniform CD-ROM driver Revision: 3.20 [ 1.034849] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.034931] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.048891] sda1 sda2 sda3 sda4 < sda5 sda6 > [ 1.090433] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.090457] Freeing unused kernel memory: 620k freed [ 1.091472] Write protecting the kernel text: 4540k [ 1.091500] Write protecting the kernel read-only data: 1668k [ 1.123795] udev: starting version 151 [ 1.168079] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.336842] usb 2-1: configuration #1 chosen from 1 choice [ 1.405128] Floppy drive(s): fd0 is 1.44M [ 1.412725] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 1.412731] Copyright (c) 1999-2006 Intel Corporation. [ 1.412794] e1000 0000:01:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.425229] usbcore: registered new interface driver hiddev [ 1.426629] FDC 0 is a post-1991 82077 [ 1.686724] e1000: 0000:01:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:08:74:19:5a:db [ 1.687559] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 1.688232] generic-usb 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 1.688277] usbcore: registered new interface driver usbhid [ 1.688408] usbhid: v2.6:USB HID core driver [ 1.722474] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.796035] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1.954448] usb 4-2: configuration #1 chosen from 1 choice [ 1.962726] input: Thrustmaster T.Flight Stick X as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input5 [ 1.963394] generic-usb 0003:044F:B106.0002: input,hidraw1: USB HID v1.00 Joystick [Thrustmaster T.Flight Stick X] on usb-0000:00:1d.2-2/input0 [ 7.169738] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 16.204449] udev: starting version 151 [ 16.493260] lp: driver loaded but no devices found [ 16.520201] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 16.524899] Linux agpgart interface v0.103 [ 16.563472] intel_rng: FWH not detected [ 16.628205] parport_pc 00:09: reported by Plug and Play ACPI [ 16.628261] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 16.639557] agpgart-intel 0000:00:00.0: Intel 830M Chipset [ 16.639762] agpgart-intel 0000:00:00.0: detected 892K stolen memory [ 16.729380] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 16.747692] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 16.769228] lp0: using parport0 (interrupt-driven). [ 16.927254] dell-wmi: No known WMI GUID found [ 16.928486] [drm] Initialized drm 1.1.0 20060810 [ 16.958983] ppdev: user-space parallel port driver [ 17.009825] type=1505 audit(1032818909.028:2): operation="profile_load" pid=462 name="/sbin/dhclient3" [ 17.010424] type=1505 audit(1032818909.028:3): operation="profile_load" pid=462 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.010740] type=1505 audit(1032818909.028:4): operation="profile_load" pid=462 name="/usr/lib/connman/scripts/dhclient-script" [ 17.111254] [drm] i915 disabling kernel modesetting for known bad device. [ 17.111288] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 17.111297] pci 0000:00:02.0: setting latency timer to 64 [ 17.144381] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 17.188042] vga16fb: initializing [ 17.188053] vga16fb: mapped to 0xc00a0000 [ 17.188367] fb0: VGA16 VGA frame buffer device [ 17.451544] alloc irq_desc for 17 on node -1 [ 17.451548] alloc kstat_irqs on node -1 [ 17.451560] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 17.451623] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 17.457189] Console: switching to colour frame buffer device 80x30 [ 17.828090] intel8x0_measure_ac97_clock: measured 52583 usecs (2534 samples) [ 17.828097] intel8x0: clocking to 48000 [ 17.866650] type=1505 audit(1032818909.884:5): operation="profile_load" pid=606 name="/usr/share/gdm/guest-session/Xsession" [ 17.882135] type=1505 audit(1032818909.900:6): operation="profile_replace" pid=609 name="/sbin/dhclient3" [ 17.882759] type=1505 audit(1032818909.900:7): operation="profile_replace" pid=609 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.883101] type=1505 audit(1032818909.900:8): operation="profile_replace" pid=609 name="/usr/lib/connman/scripts/dhclient-script" [ 17.916782] type=1505 audit(1032818909.936:9): operation="profile_load" pid=612 name="/usr/bin/evince" [ 17.929078] type=1505 audit(1032818909.948:10): operation="profile_load" pid=612 name="/usr/bin/evince-previewer" [ 17.934530] type=1505 audit(1032818909.952:11): operation="profile_load" pid=612 name="/usr/bin/evince-thumbnailer" [ 18.391990] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 404.546052] I-pipe: Domain RTAI registered. [ 404.546065] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 404.546069] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 404.546078] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 404.546081] PIPELINE layers: [ 404.546085] e0c85e20 9ac15d93 RTAI 200 [ 404.546089] c085cb20 0 Linux 100 [ 404.591166] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 404.591418] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 404.591426] RTAI[sched]: hard timer type/freq = APIC/8302520(Hz); default timing: periodic; linear timed lists. [ 404.591430] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2656640000 hz. [ 404.591434] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 404.591638] RTAI[usi]: enabled. [ 404.725596] RTAI[math]: loaded. [ 415.632391] RTAI[math]: unloaded. [ 415.720284] SCHED releases registered named ALIEN RTGLBH [ 415.737898] RTAI[malloc]: unloaded. [ 415.836020] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 415.842636] I-pipe: Domain RTAI unregistered. [ 415.842651] RTAI[hal]: unmounted. [ 438.508253] I-pipe: Domain RTAI registered. [ 438.508266] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03. [ 438.508270] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) . [ 438.508279] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0). [ 438.508282] PIPELINE layers: [ 438.508286] e1435e20 9ac15d93 RTAI 200 [ 438.508290] c085cb20 0 Linux 100 [ 438.543210] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>. [ 438.543463] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes. [ 438.543470] RTAI[sched]: hard timer type/freq = APIC/8302520(Hz); default timing: periodic; linear timed lists. [ 438.543474] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2656640000 hz. [ 438.543478] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns. [ 438.543683] RTAI[usi]: enabled. [ 438.658876] RTAI[math]: loaded. [ 439.561763] RTAI[math]: unloaded. [ 439.645830] SCHED releases registered named ALIEN RTGLBH [ 439.661920] RTAI[malloc]: unloaded. [ 439.760025] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0). [ 439.765561] I-pipe: Domain RTAI unregistered. [ 439.765577] RTAI[hal]: unmounted. [ 456.736066] usb 4-2: USB disconnect, address 2 [ 461.444025] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 461.579994] usb 1-6: configuration #1 chosen from 1 choice [ 461.617752] Initializing USB Mass Storage driver... [ 461.617954] scsi2 : SCSI emulation for USB Mass Storage devices [ 461.618243] usbcore: registered new interface driver usb-storage [ 461.618249] USB Mass Storage support registered. [ 461.623869] usb-storage: device found at 4 [ 461.623875] usb-storage: waiting for device to settle before scanning [ 466.620267] usb-storage: device scan complete [ 466.621354] scsi 2:0:0:0: Direct-Access Lexar JD Lightning 3000 PQ: 0 ANSI: 0 CCS [ 466.626230] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 466.634360] sd 2:0:0:0: [sdb] 1960960 512-byte logical blocks: (1.00 GB/957 MiB) [ 466.635215] sd 2:0:0:0: [sdb] Write Protect is off [ 466.635221] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 466.635225] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 466.637610] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 466.637624] sdb: sdb1 [ 466.711344] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 466.711356] sd 2:0:0:0: [sdb] Attached SCSI disk [ 506.177519] usb 1-6: USB disconnect, address 4 [ 1336.624037] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 1336.759974] usb 1-6: configuration #1 chosen from 1 choice [ 1336.767392] scsi3 : SCSI emulation for USB Mass Storage devices [ 1336.770886] usb-storage: device found at 5 [ 1336.770891] usb-storage: waiting for device to settle before scanning [ 1341.768314] usb-storage: device scan complete [ 1341.769407] scsi 3:0:0:0: Direct-Access Lexar JD Lightning 3000 PQ: 0 ANSI: 0 CCS [ 1341.773513] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1341.782010] sd 3:0:0:0: [sdb] 1960960 512-byte logical blocks: (1.00 GB/957 MiB) [ 1341.782894] sd 3:0:0:0: [sdb] Write Protect is off [ 1341.782899] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 1341.782903] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1341.786219] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1341.786236] sdb: sdb1 [ 1341.860777] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 1341.860791] sd 3:0:0:0: [sdb] Attached SCSI disk ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers