Bugs item #3459187, was opened at 2011-12-13 17:55 Message generated for change (Tracker Item Submitted) made by You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3459187&group_id=6744
Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: G-code Interpreter Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: romeo () Assigned to: Nobody/Anonymous (nobody) Summary: Fail to load tool Initial Comment: With manual tool change deactivated from stepconf, in ini file i have net tool-number <= iocontrol.0.tool-prep-number net tool-change-loopback iocontrol.0.tool-change => iocontrol.0.tool-changed net tool-prepare-loopback iocontrol.0.tool-prepare => iocontrol.0.tool-prepared load the attached tool.tbl when in MDI or played from gcode T1 works fine, T2 gives error message "requested tool 2 not found in the tool table" which is true but when you try to load tool 3 (T3 M6) No tool will be loaded as if you actually load T0 The tool 3 is present in the tool table and so it should be loaded, this bug is not present in 2.4 and 2.5 version of EMC ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=106744&aid=3459187&group_id=6744 ------------------------------------------------------------------------------ Cloud Computing - Latest Buzzword or a Glimpse of the Future? This paper surveys cloud computing today: What are the benefits? Why are businesses embracing it? What are its payoffs and pitfalls? http://www.accelacomm.com/jaw/sdnl/114/51425149/ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
