Gee wiz, it does do that as shown in the manual... http://linuxcnc.org/docview/2.5/html/gcode/gcode.html#_g64_path_blending_a_id_sec_g64_path_blending_a
On 1/8/2012 4:17 AM, Viesturs Lācis wrote: > > Unfortunately most cases I have seen, where lots of small moves are > used, are not straight lines, but arcs. If "naive CAM detector" was > able to approximate such small lines to an arc within given tolerance, > then it really would make sense and, probably, solve the whole issue. > > ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
