> From: tom-...@bgp.nu
> Date: Wed, 6 Feb 2013 14:24:29 -0500
> To: emc-developers@lists.sourceforge.net
> Subject: Re: [Emc-developers] gscreen merged to master
>
>
> On Feb 6, 2013, at 1:36 PM, Sebastian Kuzminsky <s...@highlab.com> wrote:
>
> > Tom is running debs from the buildbot, so he should not run the
> > rip-environment script.
> >
> > Tom, make sure you've installed a 2.6~pre deb, not a 2.5 deb. You can
> > check what you currently have installed by running this:
> >
> > dpkg -s linuxcnc | grep Version
> >
> > (Or "linuxcnc-sim", depending on if you're running the sim or realtime
> > version.)
> >
> > Note that 2.5 and 2.6 debs live in different parts of the debian
> > archive, and so need different lines in the sources.list. See the
> > instructions on "Using these packages" here:
> >
> > http://buildbot.linuxcnc.org/
>
> Hmm, when I type dpkg -s linuxcnc | grep Version it tells me Version 1: 2.5.1.
> If I don't type . ./rip-enviromment from within ~/linucnc-dev/scripts then
> "linuxcnc" launches 2.5.1.
> If I do type . ./rip-enviromment from within ~/linucnc-dev/scripts then
> "linuxcnc" launches 2.6.0~pre
> But in either case I do not see gscreen anywhere...
>
> I did this to get 2.6.0~pre -> put "deb http://buildbot.linuxcnc.org/ lucid
> master-rt" in /etc/apt/sources.list.d/linuxcnc-buildbot.list
> This is a 10.04 install of Ubuntu.
>
> Tom
Sorry Tom I led you down the dark path with the .script/rip command
I'm so used to run-in-place :)
I'm not sure what going on.
Chris M
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers