After commit 33380c4b was applied AXIS will not run for me.
Other GUIs run though (Gscreen, TK, TOUCHY)
I get this:
task pid=2808
emcTaskInit: using builtin interpreter
store_named_parameter: level[0] _vmajor value=2.600000
store_named_parameter: level[0] _vminor value=0.000000
store_named_parameter: level[0] _line value=0.000000
store_named_parameter: level[0] _motion_mode value=1.000000
store_named_parameter: level[0] _plane value=2.000000
store_named_parameter: level[0] _ccomp value=3.000000
store_named_parameter: level[0] _metric value=4.000000
store_named_parameter: level[0] _imperial value=5.000000
store_named_parameter: level[0] _absolute value=6.000000
store_named_parameter: level[0] _incremental value=7.000000
store_named_parameter: level[0] _inverse_time value=8.000000
store_named_parameter: level[0] _units_per_minute value=9.000000
store_named_parameter: level[0] _units_per_rev value=10.000000
store_named_parameter: level[0] _coord_system value=11.000000
store_named_parameter: level[0] _tool_offset value=12.000000
store_named_parameter: level[0] _retract_r_plane value=13.000000
store_named_parameter: level[0] _retract_old_z value=14.000000
store_named_parameter: level[0] _spindle_rpm_mode value=15.000000
store_named_parameter: level[0] _spindle_css_mode value=16.000000
store_named_parameter: level[0] _ijk_absolute_mode value=17.000000
store_named_parameter: level[0] _lathe_diameter_mode value=18.000000
store_named_parameter: level[0] _lathe_radius_mode value=19.000000
store_named_parameter: level[0] _spindle_on value=20.000000
store_named_parameter: level[0] _spindle_cw value=21.000000
store_named_parameter: level[0] _mist value=22.000000
store_named_parameter: level[0] _flood value=23.000000
store_named_parameter: level[0] _speed_override value=24.000000
store_named_parameter: level[0] _feed_override value=25.000000
store_named_parameter: level[0] _adaptive_feed value=26.000000
store_named_parameter: level[0] _feed_hold value=27.000000
store_named_parameter: level[0] _feed value=28.000000
store_named_parameter: level[0] _rpm value=29.000000
store_named_parameter: level[0] _current_tool value=30.000000
store_named_parameter: level[0] _current_pocket value=32.000000
store_named_parameter: level[0] _selected_pocket value=31.000000
store_named_parameter: level[0] _selected_tool value=45.000000
store_named_parameter: level[0] _x value=33.000000
store_named_parameter: level[0] _y value=34.000000
store_named_parameter: level[0] _z value=35.000000
store_named_parameter: level[0] _a value=36.000000
store_named_parameter: level[0] _b value=37.000000
store_named_parameter: level[0] _c value=38.000000
store_named_parameter: level[0] _u value=39.000000
store_named_parameter: level[0] _v value=40.000000
store_named_parameter: level[0] _w value=41.000000
store_named_parameter: level[0] _value value=42.000000
store_named_parameter: level[0] _value_returned value=46.000000
store_named_parameter: level[0] _task value=47.000000
store_named_parameter: level[0] _call_level value=43.000000
store_named_parameter: level[0] _remap_level value=44.000000
/home/chris/emc2-dev/scripts/linuxcnc: line 716: 2809 Segmentation fault
$EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS
If I build before this commit AXIS runs fine.
Just me?
Chris M
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
