I would ask you to try the anti-static branch: http://git.linuxcnc.org/gitweb?p=linuxcnc.git;a=shortlog;h=refs/heads/anti-static
this achieves a first step to what Jeff set out to do, but in a different way note there still might be segfaults on Axis shutdown, but the cause of those is known and now fixable in a second step beware: this code is still warm - Michael Am 29.09.2013 um 22:22 schrieb Michał Geszkiewicz <[email protected]>: > Got same result here on Axis with sim_mm config. > > W dniu 29.09.2013 21:53, Chris Morley pisze: >> After commit 33380c4b was applied AXIS will not run for me. >> Other GUIs run though (Gscreen, TK, TOUCHY) >> I get this: >> >> task pid=2808 >> emcTaskInit: using builtin interpreter >> store_named_parameter: level[0] _vmajor value=2.600000 >> store_named_parameter: level[0] _vminor value=0.000000 >> store_named_parameter: level[0] _line value=0.000000 >> store_named_parameter: level[0] _motion_mode value=1.000000 >> store_named_parameter: level[0] _plane value=2.000000 >> store_named_parameter: level[0] _ccomp value=3.000000 >> store_named_parameter: level[0] _metric value=4.000000 >> store_named_parameter: level[0] _imperial value=5.000000 >> store_named_parameter: level[0] _absolute value=6.000000 >> store_named_parameter: level[0] _incremental value=7.000000 >> store_named_parameter: level[0] _inverse_time value=8.000000 >> store_named_parameter: level[0] _units_per_minute value=9.000000 >> store_named_parameter: level[0] _units_per_rev value=10.000000 >> store_named_parameter: level[0] _coord_system value=11.000000 >> store_named_parameter: level[0] _tool_offset value=12.000000 >> store_named_parameter: level[0] _retract_r_plane value=13.000000 >> store_named_parameter: level[0] _retract_old_z value=14.000000 >> store_named_parameter: level[0] _spindle_rpm_mode value=15.000000 >> store_named_parameter: level[0] _spindle_css_mode value=16.000000 >> store_named_parameter: level[0] _ijk_absolute_mode value=17.000000 >> store_named_parameter: level[0] _lathe_diameter_mode value=18.000000 >> store_named_parameter: level[0] _lathe_radius_mode value=19.000000 >> store_named_parameter: level[0] _spindle_on value=20.000000 >> store_named_parameter: level[0] _spindle_cw value=21.000000 >> store_named_parameter: level[0] _mist value=22.000000 >> store_named_parameter: level[0] _flood value=23.000000 >> store_named_parameter: level[0] _speed_override value=24.000000 >> store_named_parameter: level[0] _feed_override value=25.000000 >> store_named_parameter: level[0] _adaptive_feed value=26.000000 >> store_named_parameter: level[0] _feed_hold value=27.000000 >> store_named_parameter: level[0] _feed value=28.000000 >> store_named_parameter: level[0] _rpm value=29.000000 >> store_named_parameter: level[0] _current_tool value=30.000000 >> store_named_parameter: level[0] _current_pocket value=32.000000 >> store_named_parameter: level[0] _selected_pocket value=31.000000 >> store_named_parameter: level[0] _selected_tool value=45.000000 >> store_named_parameter: level[0] _x value=33.000000 >> store_named_parameter: level[0] _y value=34.000000 >> store_named_parameter: level[0] _z value=35.000000 >> store_named_parameter: level[0] _a value=36.000000 >> store_named_parameter: level[0] _b value=37.000000 >> store_named_parameter: level[0] _c value=38.000000 >> store_named_parameter: level[0] _u value=39.000000 >> store_named_parameter: level[0] _v value=40.000000 >> store_named_parameter: level[0] _w value=41.000000 >> store_named_parameter: level[0] _value value=42.000000 >> store_named_parameter: level[0] _value_returned value=46.000000 >> store_named_parameter: level[0] _task value=47.000000 >> store_named_parameter: level[0] _call_level value=43.000000 >> store_named_parameter: level[0] _remap_level value=44.000000 >> /home/chris/emc2-dev/scripts/linuxcnc: line 716: 2809 Segmentation fault >> $EMCDISPLAY -ini "$INIFILE" $EMCDISPLAYARGS $EXTRA_ARGS >> >> If I build before this commit AXIS runs fine. >> Just me? >> >> Chris M >> >> ------------------------------------------------------------------------------ >> October Webinars: Code for Performance >> Free Intel webinars can help you accelerate application performance. >> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from >> the latest Intel processors and coprocessors. See abstracts and register > >> http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers >> >> > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60133471&iu=/4140/ostg.clktrk _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
