To be specific, G92.1 is not clearing #5061, the g54 X offset. Possibly not clearing #5062 or #5063, all of which I use to calibrate the machine
I can code around it as there's nothing to stop me from putting a line in the earlier code to clear it. It works from the MDI interface. #5061 = 0.00000000000 The symptoms are a continuously growing X offset in where it goes when the program, assuming its at zero, tells it to move to 0.337 preparatory to executing a G38.2 to find the jig contact, which it should find by 0.425, the #5061 thereby recorded then being moved to the G54 co-ordinate system. Instead it was running to a - value about 3/4" away, and every iteration of the program made the error larger. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
