On 13 August 2015 at 16:25, Gene Heskett <[email protected]> wrote: >> So, if you had [HALUI]MDI_COMMAND=G0X0Y0Z0 >> then whenever the halui.mdi-command-00 HAL pin went high, the machine >> would move to 0,0,0 > > Shouldn't this example be > [HALUI] > halui.mdi-command-00=G0X0Y0Z0 > halui.mdi-comamnd-01= some other idiocy?
No, it [HALUI] MDI_COMMAND=G1 X1 MDI_COMMAND=G1 Y2 ... Then the halui.mdi-command-00 pin is G1 X1 and halui.mdi-command-01 pin is G1 Y2 The pins are allocated by sequence in the list. Which isn't very satisfying, but is what it is. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
