Chris asked me to keep this on the EMC list, not the EMC Dev list so I will respond to your comments there.
Thanks, Dave On 10/16/2015 11:50 PM, Tom Easterday wrote: > You didn't say what kind of throughput you need nor what your budget is but > one option is something like a Cisco RV320 on each end with 4G modems > attached. You can see a review of the router here: > > http://www.smallnetbuilder.com/lanwan/lanwan-reviews/32317-cisco-rv320-dual-gigabit-wan-vpn-router-reviewed?limitstart=0 > > There is also a you tube video on configuring the modem: > http://youtu.be/RXerRGEZFEI > > I recommended the RV180 for a friend's business that needed sts vpn (over > public internet, not over cellular) and it worked well for him and he said it > was easy for them to set up and use. > > There are of course other more diy setups using cell phones with tethering > and using OpenVPN or such on your own processors. But you have to be careful > as carriers may try to limit or block always on use of tethering and data > plans may not fit your requirements. Or you get some cellular wifi hotspots > and use them with OpenVPN. > See: > http://www.smallnetbuilder.com/other/security/security-howto/30353-how-to-set-up-a-site-to-site-vpn-with-openvpn > >> On Oct 16, 2015, at 3:08 PM, Dave Cole <[email protected]> wrote: >> >> Key points - need help with a data cell phone connection to remote >> equipment via a VPN. >> >> Guys, >> >> I'm working with some remotely located equipment and I need to establish >> a comm link to it. >> >> We have decided to go with a cell phone data connection. We want to be >> able to remotely access this equipment via a "site to site" VPN. >> This is different than a client/server VPN connection that people >> oftentimes use to connect back to corporate headquarters for email, file >> sharing etc. >> >> The remote equipment is ethernet based but it is not a generic PC, it's >> a PLC. So I need the remote cell phone modem/router to do all of the >> work of encrypting the data, establishing the VPN tunnel, etc. It needs >> to be a VPN Router with a 4G modem built in that supports a "site to >> site connection" and not just be a Router with VPN passthrough. >> >> Sprint sells a Netgear 6100D 4G router that is suppose to do this. I >> bought it and then Sprint told me that they will not support remote >> access on this device! >> >> Does anyone have any experience in doing this? I've been talking to >> "experts" at Sprint and they want me to use a Sprint approved 4G >> cell/router that only supports VPN pass through after I have told them >> over and over that I need to do a site to site VPN with their 4G router >> acting as a VPN endpoint. >> >> Sadly, they don't understand the requirements. >> >> Ironically, TP Link sells a "wired" VPN router for about $60 that does >> what I need, so I could "stack" routers to do what I need, but I really >> don't want to have two routers in the remote control box. >> >> There are some really brilliant people on this list so I am hoping that >> someone can give me some advice/direction etc. >> >> Thank You! >> >> Dave >> >> --- >> This email has been checked for viruses by Avast antivirus software. >> https://www.avast.com/antivirus >> >> >> ------------------------------------------------------------------------------ >> _______________________________________________ >> Emc-developers mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-developers --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
