If the toolpath take in consideration the tool shape (tool angle) and the
current compensation, it would be very useful.
( type is II not 11 :-) )
Good work!
Citando andy pugh <[email protected]>:
> There are two ongoing work-streams with this:
>
> G71 as a G-Code is happening in this branch:
> https://github.com/LinuxCNC/linuxcnc/tree/BenPotter/G71
>
> At the same time I am experimenting with G71 Type 11 (ie, with
> pockets) as a Python remap in this branch:
> https://github.com/LinuxCNC/linuxcnc/tree/andypugh/g71type2remap
>
> The point of the Python version is to work out the niggles in the
> algorithms in a situation where debugging is easier and there is no
> compile step.
>
> Example video: https://www.youtube.com/watch?v=DwV2cibjGmo
>
> It is nearly ready for requests to attempt to break it.
>
> --
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1916
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Emc-developers mailing list
> [email protected]https://lists.sourceforge.net/lists/listinfo/emc-developers
------------------------------------------------------------------------------
_______________________________________________
Emc-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-developers
