Chris, Thanks for that and yes, I would be interested.
Cheers, Phill. > On 26 Jun 2019, at 11:38 am, Chris Morley <[email protected]> wrote: > > Phill > > I just merged your axis/gladevcp work, sorry I forgot about it. > I think it would be great to get plasmac in 2.9. > I also think we should give you push access - are you interested? > > Chris M > > ________________________________ > From: Phillip Carter <[email protected] > <mailto:[email protected]>> > Sent: June 26, 2019 1:18 AM > To: emc-developers > Subject: [Emc-developers] plasmac > > I have been working on a plasma config which is a complete configuration for > a plasma cutter consisting of a component named plasmac.comp and > configuration files for both Axis and Gmoccapy. > It has been tested by several users and is at the stage where I think it > could be incorporated into 2.9. It cannot be used in earlier versions as it > uses the reverse run feature. > At the moment I have the configurations in configs/by_machine/plasmac and I > am not sure whether this is the correct place for them. > I recently put in a PR which would also be nice to have committed otherwise I > would need to make some changes to the plasmac Axis config. > I have done a user guide in asciidoc but have just noticed that it is quite > different in format to the LinuxCNC docs so I will need to rewrite that to > suit. I am also unsure as to where this doc should go and how to incorporate > it into the LinuxCNC docs. > > Cheers, Phill. > > PR: https://github.com/LinuxCNC/linuxcnc/pull/606 > <https://github.com/LinuxCNC/linuxcnc/pull/606> > <https://github.com/LinuxCNC/linuxcnc/pull/606 > <https://github.com/LinuxCNC/linuxcnc/pull/606>> > > User Guide: > https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc > > <https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc><https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc > > <https://github.com/phillc54/linuxcnc/blob/plasmac/configs/by_machine/plasmac/documents/plasmac/plasmac_user_guide.adoc>> > _______________________________________________ > Emc-developers mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/emc-developers > <https://lists.sourceforge.net/lists/listinfo/emc-developers> > > _______________________________________________ > Emc-developers mailing list > [email protected] > <mailto:[email protected]> > https://lists.sourceforge.net/lists/listinfo/emc-developers > <https://lists.sourceforge.net/lists/listinfo/emc-developers> _______________________________________________ Emc-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-developers
