Maybe you should also check-out NativeCAM, which is basically a UI and wizards made of O-code.
Regards, Daniel Am Mo., 7. Juni 2021 um 04:22 Uhr schrieb Feral Engineer < theferalengin...@gmail.com>: > I'm gonna look at your project to help wrap my head around C. It might be > helpful for me 😊 > > Phil T. > The Feral Engineer > > Check out my LinuxCNC tutorials, machine builds and other antics at > www.youtube.com/c/theferalengineer > > On Fri, Jun 4, 2021, 7:42 PM Jon Elson <el...@pico-systems.com> wrote: > > > On 06/04/2021 05:35 PM, John Thornton wrote: > > > I noticed that the GWiz Wizard has not been touched for 12 > > > years and seems to be unfinished. Should we depreciate > > > that from master and remove it from the documents? > > > > > I was interesting in this as an extension to LinuxCNC. I > > converted one of my personal "wizards" > > to python a long time ago to see how difficult it was. > > Recently, I published source code for ALL my wizards on my > > web site. These are all in c, and generate g-code > > compatible with LinuxCNC. > > (See http://pico-systems.com/gcode.html for the links.) > > If somebody wanted to convert these to GWiz, or straight > > Python, please be my guest. > > > > I use these programs very often to generate my G-code for > > machining panels. > > Probably, others have similar programs that could > > collectively make up a pretty good set of wizards. > > > > Jon > > > > > > _______________________________________________ > > Emc-developers mailing list > > Emc-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
