Den 2022-07-06 kl. 14:07, skrev andy pugh:
On Wed, 6 Jul 2022 at 06:51, Nicklas SB Karlsson <n...@nksb.eu> wrote:
To use degree while everyone else use radians might be a problem though
might be easier to work with degree. Then doing calculations radians
often have to be used for a CNC machine an example is calculate surface
speed.
You need Pi to calculate surface speed, but not trigonometry. But to
make that really simple we could mandate that spindle speeds all be
stated in radians per second.
Maybe if others do it but otherwise probably not.
Fanuc - degrees. (But offers G51 part rotation in deg and G52 in rad)
Duet - radians.
Mach3 - degrees
Fagor - degrees
Mitsubishi - degrees
Four out of five in degree then, only Duet in radians. That's different,
degree ought to be a a good choice for geometry. Guess there are many
cases then fit corners accurate is simpler in degrees.
Nicklas Karlsson
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
