Marked lines are comments, they are not executed and they do not follow a formal syntax.
T6 M6 do a tool change so this tool is certainly used in g-code. Nicklas Karlsson fre 2023-01-13 klockan 19:38 -0500 skrev Small Shop Concepts: > here is an example of the tool list in the gcode file: > > [image: tool_list.png] > > > On Fri, Jan 13, 2023 at 6:23 PM Nicklas SB Karlsson <n...@nksb.eu> > wrote: > > > fre 2023-01-13 klockan 22:16 +0000 skrev andy pugh: > > > On Fri, 13 Jan 2023 at 21:32, Nicklas SB Karlsson <n...@nksb.eu> > > > wrote: > > > > > > > > Anyone else think it would be useful with possibility to show > > > > which > > > > tools a loaded NC file use? > > > > > > The Axis interface has G-code properties that show the file > > > extents, > > > distance etc. It feels like it ought to be possible to track the > > > tools > > > used whilst capturing that data. > > > > > Yes to show the tools used in this dialog might be the right place. > > > > > > Nicklas Karlsson > > > > > > > > _______________________________________________ > > Emc-developers mailing list > > Emc-developers@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-developers > > > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
