FYI - The Northeast Product Safety Society has passed your job
postings along to its members.
-------- Begin Included Message -----
The 57 job postings tabulated below are simply the job postings on the
PSTC and TREG internet plus a few job postings I became aware of. I
compiled this job posting information for a friend and then decided to
circulate this information as a benefit for members of the Northeast
Product Safety Society (NPSS). If your in the Northeast on 25-Sep-96,
I hope to see you at the joint meeting NPSS /New England Chapter
of IEEE EMC Society.
-------------------------------------------------------------------
NPSS Profile:
The NPSS has a mailing list of 250 product safety professionals located
in the Northeast USA. The president of NPSS is Art Michael. Other 1996
officers include Bruce Langmuir, Robert Chaplis, Leo Simon, Noel
Plouffe, Bill Wilson and myself. At each meeting there are usually
between 27 to 62 product safety professionals in a wide cross-section
of industries. Some of the NPSS members also have EMC and telecom
compliance responsibilities.
The average attendance at NPSS meetings in 1996 is 40 product safety
professionals per meeting based on the following:
26-Jun-96 => 32 attendees for Raychem & Weinstein Associates
22-May-96 => 62 attendees for TUV Essen, TUV PS & TUV Rheinland
24-Apr-96 => 44 attendees for CPSC and IEC TC74 at annual dinner
27-Mar-96 => 48 attendees for Detecon & Eng Associates
28-Feb-96 => 27 attendees for Process Mapping/Expert Witness
24-Jan-96 => 29 attendees for Semiconductor Equipment & Materials Int'l
Generally, most members are electrical engineers who who are employed
at major companies to handle UL, FM, CSA, TUV, NEMKO, BSI, VDE safety
certifications for their companies which design and manufacture end
products and/or critical components such as power supplies,
transformers,etc. Some members have other degrees. Some members are
independent contractors providing engineering/certification services to
various companies and/or publishing product safety newsletters.
Members represent manufacturers from various product categories:
Information Technology Industry 40%, Medical Industry 15%,
Telecomunication Industry 10%, Electrical Industry 10%, Radio & TV
10%, Semiconductor Equipment 5% and other Industries 10%.
-------------------------------------------------------------------
Subject: job postings updated Rev X12, dated: 17-Sep-96
There were 4 new job postings since Rev X11, dated: 11-Sep-96
Here is the list of job opportunities that have come to my attention
with the updates mentioned above added:
Tue, Sep 17 1996 From: john_czyzew...@notes.nmss.com (John CZ)
Mon, Sep 16 1996 From: jsn...@rns.com (Jim Snell )
Fri, Sep 13 1996 From: sherry_magu...@fci.com (Sherry Maguire)
Wed, Sep 11 1996 From: john.nel...@ast.com (John Nelson)
Wed, Sep 11 1996 From: (DJ Kirwin)
Mon, Sep 09 1996 From: bow...@mindspring.com (Dr. Dean Bowser)
Thu, Sep 05 1996 From: mhow...@ckc.com (Michelle Howard)
Wed, Sep 04 1996 From: mle...@zoomtel.com (M Levin)
Fri, Aug 30 1996 From: br...@texas.net (Brad Rehm)
Wed, Aug 28 1996 From: (Doug Johnson)
Wed, Aug 28 1996 From: lzz...@email.mot.com (Joe Jurasek)
Thu, Aug 22 1996 From: (Gary Carter)
Thu, Aug 15 1996 From: wpede...@gentner.com (Bill Pedersen)
Thu, Aug 15 1996 From: wpede...@gentner.com (Bill Pedersen)
Wed, Aug 14 1996 From: lluttr...@tuvps.com (Lyle F. Luttrell)
Tue, Aug 06 1996 From: ma...@bnr.ca (Marko Radojicic)
Tue, Aug 06 1996 From: eszl...@tuv.com (Ed Eszlari)
X Wed, Jun 19 1996 From: don_monc...@qmail.newbridge.com (Don Moncion)
X Wed, Jun 12 1996 From: tl...@telenet.com (Thomas Ladd)
X Wed, Jun 12 1996 From: mill...@ul.com (Bob M. Miller)
X Wed, Jun 12 1996 From: 76660.2...@compuserve.com (Arlene Greenstein)
X Tue, Jun 11 1996 From: gchai...@faxint.com (George Chaisson)
X Wed, Jun 05 1996 From: john...@lesreg.enet.dec.com (Robert Johnson)
X Thu, May 30 1996 From: bay...@aol.com (Charlie Bayhi)
X Mon, May 20 1996 From: rtflind...@aol.com (Mitch Gilbert)
X Fri, May 17 1996 From: jim.wi...@adtran.com (Jim Wiese)
X Wed, May 15 1996 From: sc...@hpsdde.sdd.hp.com (Scott Roleson)
X Wed, May 08 1996 From: judith_apari...@hp-iberia-om2.om.hp.com (Judith
Aparicio)
X Sun, May 05 1996 From: sgro...@cisco.com (Semyon Grozman)
X Fri, May 03 1996 From: (Bob Norton)
X Fri, May 03 1996 From: Dan_Drumheller/US/3com%3...@smtp1.isd.3com.com (Dan
Drumheller)
X Thu, May 02 1996 From: (Joe Jurasek)
X Thu, May 02 1996 From: bruce_langm...@bose.com (Bruce Langmuir)
X Tue, Apr 30 1996 From: volgstadt_ro...@tandem.com (Roger Volgatadt)
X Mon, Apr 29 1996 From: mi...@allware.com or mi...@wll.com (Mike Violette)
X Wed, Apr 24 1996 From: mike_mo...@nmss.com (Michael Motta)
X Mon, Apr 22 1996 From: st...@emc.com (Cliff Stark)
X Thu, Apr 18 1996 From: cynth...@dgii.com (Cynthia Pleach)
X Wed, Apr 17 1996 From: fot...@ccmailpc.ctron.com (Ron Fotino)
X Thu, Apr 11 1996 From: MLA!bco...@medlaba.attmail.com (Bill Corry)
X Thu, Mar 28 1996 From: naftali.shani.0500...@nt.com (Naftali Shani)
X Fri, Mar 22 1996 From: mmert...@modicon.com (Mike Mertinooke)
X Thu, Mar 21 1996 From: jo...@ces.teradyne.com (John Freudenberg)
X Mon, Mar 18 1996 From: tgr...@cisco.com (Tim Grace)
X Tue, Mar 05 1996 From: (Allen B. Claire)
X Thu, Feb 29 1996 From: ma...@bnr.ca (ML - Marko Radojicic)
X Wed, Feb 14 1996 From: dgor...@tuvps.com (Debbie Gorski)
X Wed, Jan 31 1996 From: dhend...@chipcom.com (Doug Henderson)
X Mon, Jan 22 1996 From: direct.resour...@easynet.co.uk (Grant McCall)
X Thu, Jan 18 1996 From: jdonne...@encad.com (Jim Donnelly)
X Mon, Jan 08 1996 From: lluttr...@tuvps.com (Lyle Luttrell) or
fdoming...@tuvps.com (Frank Dominguez)
X Wed, Jan 03 1996 From: elizab...@bbt.com (Elizabeth Maxedon)
X Wed, Jan 03 1996 From: dave_hi...@qmail.newbridge.com (Dave Hills)
X Sun, Dec 31 1995 From: mfran...@gol.com (Mark Francis)
X Tue, Dec 19 1995 From: tem...@aol.com (Bill Jacowleff)
X Fri, Dec 15 1995 From: em...@survivalsystems.com (Ty Stork)
X Fri, Dec 15 1995 From: rob_newell...@mailserver2.clix.com (Rob Newell)
"X" denotes sender responded: XXXXXXXX POSITION FILLED XXXXXXXXX
-or- no current information
"+" denotes sender responded: XXXX NEW POSITION OPENING SOON XXX
----- Begin Included Message -----
>From treg-appro...@europe.std.com Mon Sep 16 19:54:54 1996
X-Authentication-Warning: europe.std.com:
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 16 Sep 1996 19:44:37 -0400 (EDT)
From: jim snell <jsn...@rns.com>
To: t...@world.std.com, lpoul...@rns.com, cander...@rns.com
Subject: Re: SENIOR EMC COMPLIANCE ENGINEER - Sunny Santa Barbara
References: <3238763c.4...@rns.com>
Compliance Engineering position in Sunny Santa Barbara, California; the
Saint Moritz of North America. ( Many fine networking companies reside
here such as RNS(ourselves), ACC, Stratacom etc.) Santa Barbara is 88
miles north of LA with many fine features and eye captivating scenary
along with a year round mild sunny climate.
RNS - a high perfomance LAN and WAN Networking company with an intensive
hardware development design group developing ASICS and Network Adapter
products has an opening for a Senior Hardware Compliance/Support
engineer.
Engineer responsible for component and compliance engineering for a wide
range of high performance LAN and WAN network adapter, hub and router
products. Compliance engineering includes acquiring all the necessary
emmissions, immunity, and safety certifications for new products, making
design recommendations to the product team , determing which
regulations are required, scheduling and performing testing with outside
labs, and improving designs to exceed all standards. Position also
includes component engineering for qualifications, ECO's, reliability>
analysis, etc. Position reports to the Hardware Engineering Manager.
Individual will work closely with the sustaining, new product
development and manufacturing teams.
This position requires an AS degree in Electrical Engineering or
equivalent with a minimum of 5 years experience. The successful
individual must be a self-starter who wants to operate in a dynamic team
environment. They will be familiar with LAN/WAN technologies (FDDI, Fast
Ethernet, ISDN), as well as high performance bus systems (PCI and VME).
Understanding MTBF calculations and cognizance of FCC, CE mark, UL et
al.regulations are mandatory. Experience with logic/spectrum analyzers
and EMI measurement equipment desired.
Please contact Cory Anderson , HR.
RNS
7402 Hollister Ave.
Santa Barbara, Ca. 93117
(805)-968-4262
(805)-968-8256
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Tue Sep 17 09:52:03 1996
X-Authentication-Warning: europe.std.com:
To: t...@world.std.com
From: john_czyzew...@notes.nmss.com
List-Post: emc-pstc@listserv.ieee.org
Date: 17 Sep 96 9:33:19
Subject: Job Oppportunity @ NMS
Hello TREG'ers,
We have an opportunity for a regulatory person at Natural MicroSystems.
This position is focused on compliance testing activities for analog
and digital telco approvals. Experience in EMC/Safety/ Telco physical
and protocol compliance testing is required. The position involves
approximately 15% international and domestic travel. The position
requires the ability to create schedules, test plans, set up test dates
for product conformance testing, as well as setting up and configuring
the unit prior to testing. The ability to troubleshoot any problems that
might arise, and effectively understand, define, and present the problem
back to the design groups is extremely important. Also important is the
ability to work with administrative staff to maintain regulatory
folders for approval certificates, test reports, and specifications.
Specific Expertise Required
BS EE/CE or equivalent with at least 3 years of experience.
Requires Experience in international Telco approvals including
familiarity with international regulatory specifications and approvals
testing experience. Software or hardware design experience is a plus.
Specific Job Duties
Understand international regulations.
Perform and support compliance laboratory testing activities at
Telco labs throughout the world.
Create and maintain internal and customer-oriented product
compliance documentation.
Natural MicroSystems is focused on three markets: computer telephony,
including call centers, IVR, voicemail, and voice and data logging; wireless
enhanced services and network infrastructure; and the merging of data
communications and telecommunications.
We are located in Natick, MA. If you are interested, please contact:
John Czyzewicz
phone: 508-647-1294
fax: 508-651-7709
email: john_czyzew...@nmss.com
http://www.nmss.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Fri Sep 13 15:21:08 1996
List-Post: emc-pstc@listserv.ieee.org
Date: 13 Sep 1996 08:40:50 U
From: "Sherry Maguire" <sherry_magu...@fci.com>
Subject: Job Opportunity
Subject: Time:8:56 AM
OFFICE MEMO Job Opportunity Date:9/13/96
If you are looking for a stable and growing company that values employees,
and recognizes your contributions, FORCE COMPUTERS may be the company you are
looking for. With over 14 years experience in the embedded systems industry,
we are a worldwide leader. Due to our rapid growth and new systems
development, we are searching for Product Approval Engineers
FORCE COMPUTERS, needs product approval engineers to plan, schedule and
obtain all necessary product approvals for our systems and products. Your
responsibility is to ensure our products are designed to meet current and
proposed standards, as well as produce the documentation packages required to
support system approvals by outside agencies. If you have a solid design
engineering background, with at least 5 years experience in product approval
and troubleshooting, EMI/EMC or safety approvals, and good communication
skills, this may be the position for you. Please fax resume to 408.371.7638
or mail to FORCE COMPUTERS, 2001 Logic Drive, San Jose, CA 95124. For more
details visit our website at http://www.forcecomputers.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Sep 11 18:05:43 1996
From: john_nelson_at_asti...@ccmailsmtp.ast.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 11 Sep 96 12:51:08 PST
Encoding: 13 Text
To: emc-p...@mail.ieee.org
Subject: Job Postings?
Hi,
We're trying to hire a Safety Engineer and an EMC Technician. Does
your group have any sort of job posting service, newsletter that
accepts advertising, resume bank of people looking for a job change,
etc?
Thanks,
John Nelson
AST Computer, Inc.
(714) 727-8146
john.nel...@ast.com
----- End Included Message -----
----- Begin Included Message -----
From: DJ Kirwin, Research Associates Wed Sep 11 1996
Executive Recruiter DJ Kirwin called about a compliance
position in Rhode Island just south of Providence.
Call 401-463-8203 if your interested.
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Mon Sep 9 17:41:18 1996
To: emc-pstc <emc-p...@mail.ieee.org>
Cc: bowser <bowser.mindspring.....@notesgw.hns.com>
From: Gabriel Roy/HNS <gabriel_...@notesgw.hns.com>
List-Post: emc-pstc@listserv.ieee.org
Date: 9 Sep 96 14:16:21 EDT
Subject: Job Opening
Passing along a job opening for you to peruse. Regulatory compliance
engineer (safety, EMC, the usual stuff) with experience in medical
devices, for a company in the Northwest. Contact Dr. Dean Bowser, the
executive recruiter, at (770) 977-6658 or e-mail resume to
bow...@mindspring.com
Regards,
Gabriel Roy
Hughes Network Systems
MD
The above has no endorsement from Hughes Network Systems.
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Thu Sep 5 19:39:49 1996
X-Authentication-Warning: europe.std.com:
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 5 Sep 1996 16:18:38 -0700
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: t...@ims.mariposa.ca.us
Subject: Job Openings at CKC
About the Position
CKC Laboratories is looking for experienced EMC Engineers and Test
Engineers in either International Emissions (FCC, CISPR, VCCI, etc.) or
International Immunity. EMC trouble shooting skills are helpful.
Candidates need to be personable and able to work with customers. Our
EMC Engineers and Test Engineers will work daily with customers setting
up equipment for test, performing emission and immunity testing to
international and domestic standards, troubleshooting and retrofitting
systems that do not comply and generating the required paperwork. The
current positions will be for evening and Saturday shifts. Positions
are available at 2 CKC Northern California locations.
About CKC Laboratories, Inc.
CKC is the Western United States largest independent EMC certification
company. We operate 22 sites at 7 locations in California, Oregon and
Washington. CKC is the only independent U.S. laboratory holding an EN
45001 accreditation from the DAR of Germany (through DATech). The
weight of this accreditation gives our test results legal acceptability
in the entire EU, including BZT type acceptance for ETSI standards.
Visit us http://www.ckc.com for more information.
Send, fax or e-mail resumes to:
CKC Laboratories Inc.
1100 Fulton Place
Fremont, CA 94539
Attn.: Michelle
mhow...@ckc.com
Phone: 510-249-1173
Fax: 510-226-8534
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
^ Todd Robinson ^
^ Marketing Manager ^
^ CKC Laboratories, Inc. ^
^ WorldWide EMC ^
^ t...@ckc.com ^
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
----- End Included Message -----
----- Begin Included Message -----
>From santh...@zoomtel.com Wed Sep 4 13:48:43 1996
From: Steve Anthony <santh...@zoomtel.com>
To: "'jo...@ces.teradyne.com'" <jo...@ces.teradyne.com>
Cc: Steve Anthony <Windows/chrisl/ste...@zoomtel.com>,
"'dami...@icd.teradyne.com'" <dami...@icd.teradyne.com>
Subject: Compliance Engineer Opening
Hi John,
Long time no see. Hope everything is going well for you. Mike D. said
that you might be able to help us out by distributing our ad out to your
cadre of Compliance people. I've attached it below for you. I'm not
sure how it will come out on your screen but it is a copy of what we had
put in the Globe.
We are very interested in filling the Compliance Engineer position.
Your help in distributing this information is greatly appreciated.
Anyone responding can do so as noted in the ad or to me directly at
"stev...@zoomtel.com".
Thanks again for your help,
Steve Anthony
We are a growing $100 million faxmodem producer located in downtown
Boston. We offer these exciting engineering opportunities
Compliance Engineer (code: CE)
Responsible for domestic & international regulatory testing & approvals.
Includes application submittals, product testing, participation in
design reviews, and continuing compliance.
* 3 years direct compliance exp. minimum; BSEE
* FCC, European PTT, CE exp. highly desired
* Able to excel in a multitasking environment
* Ability to contribute to design reviews and=20
provide technical input
PCAD Designer (code: PD)
Responsible for schematic, PWB layout and artwork generation.
* 2 years PWB layout experience minimum
* PCAD experience highly desired
* multi-layer & SMT design exp required
* Circuit design understanding highly desired
Send resume, salary requirements & job code to:
Zoom Telephonics Inc. 207 South St. Boston,
MA 02111 Attn: M Levin
e-mail: mle...@zoomtel.com
FAX: (617)423-4859
We are an equal opportunity employer
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Fri Aug 30 12:32:09 1996
X-Authentication-Warning: millenium.texas.net:
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 30 Aug 1996 11:19:15 -0500 (CDT)
From: Compatibility Products Corporation <br...@texas.net>
To: t...@world.std.com
Subject: EMC Engineer
Hi Treggers,
We have a position open for a senior EMC engineer. This person must have
a BSEE degree or equivalent and, preferably, NARTE certification and RF
design experience. The position also requires project management skills.
Responsibilities include working with clients on regulatory and design
issues, preparing and reviewing test plans and configurations, preparing
TCFs, approving test results, and attending industry meetings.
If you are interested in the position or know of someone who might be,
please contact me at br...@ptitest.com. Information about the company is
available at www.ptitest.com.
Thanks. Brad Rehm
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Wed Aug 28 21:12:46 1996
X-Authentication-Warning: europe.std.com:
From: Joe Dwyer/Inter-Tel <joe_dwyer%inter-tel.inter-...@ns.inter-tel.com>
List-Post: emc-pstc@listserv.ieee.org
Date: 28 Aug 96 11:58:27 MS
Subject: Job Opening Chicago area
Mime-Version: 1.0
Content-Type: Text/Plain
I got a call out of the blue from a recruiter looking for a compliance engineer.
UL/CSA FCC Part 15 & 68, IC (DOC) EN, NET 1 and Bellcore experience
Degree with 7 years
Chicago area with Fortune 100 company
Call Doug Johnson at Engineering Management Staff Recruiting
214 239-6572
Disclaimers apply, as I said I was called by them.
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Wed Aug 28 15:14:30 1996
X-Authentication-Warning: europe.std.com: daemon set sender to treg-approval
using -f
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 28 Aug 1996 12:53:04 -0500
From: "Thomas McNamara-LTM010" <thomas_mcnamara-ltm...@email.mot.com>
Subject: Job Postings
Motorola's Information Systems Group, part of Motorola's Messaging,
Information and Media Sector, is looking for a self-motivated, highly
technical senior level safety engineer and EMC engineer capable of providing
direction for the design, assessment and safety/EMC certification for the
entire line of ISG communications products.
Candidates must be pro-active team players technically competent to direct
the product design, assessment and certification process to achieve first
pass certifications of products ranging from PCMCIA analog modems to RF
cable modems to network routers supporting multiple communications protocols
and services targeted for world wide markets.
Candidiates should have a minimum BSEE with at least10 years of industry
related experience and broad knowledge of various digital and analog
products. Exposure to International standards, interpretation, test methods
and equipment, certification polices and procedures is required. Knowledge
of commercially available simulation and test tools with hands-on experience
is preferred. Participation in standards committees with demonstrated
contributions to standards work is also preferred.
Contact :
Joe Jurasek
Motorola ISG
20 Cabot Blvd.
Mansfield, MA
phone : 508-261-4728
fax : 508-339-3752
email : lzz...@email.mot.com
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Thu Aug 22 18:55:08 1996
X-Authentication-Warning: europe.std.com:
List-Post: emc-pstc@listserv.ieee.org
Date: 22 Aug 1996 15:45:42 -0800
From: "David Lorusso" <david_loru...@qmgate.dsccc.com>
Subject: Opening for a Safety Engine
I just heard about an opening for a Safety Engineer in Texas. I don't =
have details about where in Texas....anyway...UL, CSA, TUV experience =
with switching power supplies, BSEE, minimum 3-5 years exp.
Call:
Gary Carter
Power Conversion International
206-771-3373
206-771-3204 (fax)
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Thu Aug 15 20:34:18 1996
>Received: by gentner.com; Thu, 15 Aug 96 15:42:50
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 15 Aug 96 15:42:50
From: Bill Pedersen <wpede...@gentner.com>
To: emc-p...@ieee.org
Subject: Job Position
Gentner Communications Corp, has an immediate opening for the position of
a Sustaining Engineer. This person will responsible for product
compliance testing in Safety, EMI and Telecom for Domestic and
International areas (CSA, CE, FCC, IC, BABT, etc.). We are looking for a
person with at least 2-3 yrs experience with a minimum BASEET or BSEE
degree. We offer a challenging environment for an individual to become
proficient/skilled in many facets of the telecommunications and broadcast
industries.
You can fax your resume to HRM at Gentner Communications Corp. (801)
977-0087 or e-mail at the address below.
Bill Pedersen
GENTNER COMMUNICATIONS CORP.
Internet:wpede...@gentner.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Thu Aug 15 20:02:13 1996
>Received: by gentner.com; Thu, 15 Aug 96 15:25:22
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 15 Aug 96 15:25:22
From: Bill Pedersen <wpede...@gentner.com>
To: emc-p...@ieee.org
Cc: Troy Orr <troy...@gnn.com>
Subject: Job Opening
Trebor International, located in Salt Lake City, Utah has an opening for
a Compliance Engineer responsible for domestic and international safety
and EMI approvals. This candidate must have a strong background in safety
and emi and be able to relocate in the Salt Lake area. If you are
interested, please contact Mr. Troy Orr, Engineering Manager, Email
address troy...@gnn.com or you can fax your resume at (801) 255-2312.
Bill Pedersen
GENTNER COMMUNICATIONS CORP.
Internet:wpede...@gentner.com
----- End Included Message -----
----- Begin Included Message -----
From: "marko (m.l.) radojicic" <ma...@bnr.ca>
Sender: "marko (m.l.) radojicic" <ma...@bnr.ca>
To: t...@sdd.hp.com
Subject: Nortel EMC Job Advertisement
Greetings everyone. The following job ad should be of interest to
some members of this group:
Job Posting: EMC Engineer
Nortel (Northern Telecom) has a senior-level position open for an
EMC/RF engineer in our Research Triangle Park (RTP), NC location.
We are searching for a person familiar with EMC analysis
techniques and tools (PCB and System Level) and EMC standards (FCC
part 15, FCC part 22, EN55081/82, IEC 1000 series, etc.). A sound
background in RF engineering and design, including mixers/IF
circuits, bandpass filters, etc. would be an asset as would
familiarity with telecom and cellular systems, architectures and
protocols.
The position will be reporting into the Public Carrier Networks
Integrity group which is responsible for the global development of
product in the areas of EMC, safety, mechanical integrity,
environmental integrity, and H/W reliability.
Nortel offers excellent compensation and benefits as well as the
opportunity to live in the RTP area which has been recognized by
Money magazine (and a lot of other people!) as one of the best
areas to live in the USA.
For confidential consideration, please fax your resume to:
919/991-7440 (Attention: Marko Radojicic)
Or if you prefer, mail to:
Marko Radojicic
Manager, Product Integrity
Nortel Technologies
Research Triangle Park, NC
27709
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Aug 14 19:54:24 1996
From: lluttr...@tuvps.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 14 Aug 96 16:55:24 MDT
X-Priority: 3 (Normal)
To: <emc-p...@ieee.org>
Subject: Boulder job opening
TUV PRODUCT SERVICE (TUV-PS), a one-stop source for product safety, EMC
and ISO 9000 Services, has an opening for a Product Safety Engineer in the
Electrical Machinery Group. This candidate will test and evaluate
electrical products to the relevant electrical and mechanical EU Directives
and Standards.
Requirements: BSEE or BSME or equivalent. Strong communication skills.
Electrical testing experience. IEC 950/UL 1950 experience a plus.
Microsoft Word for Windows and a working knowledge of DOS required. Some
travel required.
We offer an excellent salary and benefits package. Please forward your
resume and salary history to:
Email resume to:
cvanfl...@tuvps.com
Or mail or fax resume to:
Lyle F. Luttrell, Manager
TUV PRODUCT SERVICE Inc.
5541 Central Ave.
Boulder, Colorado 80301
fax 303 449 3004
----- End Included Message -----
----- Begin Included Message -----
From: fu...@tuv.com (Tony Fucci)
List-Post: emc-pstc@listserv.ieee.org
Date: 6 Aug 1996
Subject: TUV Rheinland opening in Marlboro, MA
Tony phoned to say he was leaving TUV Rheinland at the end of August
1996. His prior employer Data General made him an offer he couldn't refuse
to return. Tony was passing the word his friend and boss, Ed Eszlari,
would be shorthanded and looking to fill an immediate senior
engineer/engineer position in the electrical dept handling TUV
certifications to EN60950 and EN61010.
------ End Included Message ------
----- Begin Included Message -----
>From treg-appro...@europe.std.com Wed Jun 19
List-Post: emc-pstc@listserv.ieee.org
Date: 19 Jun 1996 15:27:05 -0400
From: "Don Moncion" <don_monc...@qmail.newbridge.com>
Subject: Safety & Network Approvals
Do you have what it takes to become part of our dynamic, highly talented team?
Newbridge Networks is looking for a qualified, dynamic individual to manage
the day to day activities of the product safety and network attachment
regulatory approvals group in our corporate center near Ottawa, Canada. The
responsibilities of the position include managing staff, resources and setting
the strategic direction of the department.
Candidates should possess B Eng or equivalent and have 5 years experience in
safety and networks attachment regulatory approvals and management experience.
Good knowledge of communications products would be considered an asset.
Newbridge Networks Corporation is the world leader in digital networking
solutions for private corporations and telecommunications service providers.
Inquiries should be directed to;
Don Moncion
Director Homologation & Standardization
Newbridge Networks Corporation
600 March Road
Kanata, Ontario
Canada K2K 2E6
613-591-3600
613-599-3654 fax
don_monc...@newbridge.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Jun 12 14:54:18 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 12 Jun 96 11:21:26 CDT
X-Priority: 3 (Normal)
To: <emc-p...@ieee.org>
From: "Bob M. Miller" <mill...@ul.com>
Subject: EMC Job Openings
UL is constructing EMC testing facilities in Santa Clara, CA: Camas, WA: and
Reserach Triangle Park, NC. As a result we have several job openings for the
following positions:
EMC LEAD ENGINEER
EMC PROJECT ENGINEER
EMC TECHNICIAN
Contact:
Rick Syens
UL Inc.
333 Pfingsten Road
Northbrook, IL 60062-2096
FAX: (847) 509-6300
E-Mail: sye...@ul.com
_________________________________________________________________
Bob M. Miller
Underwriters Laboratories Inc. Voice : (408) 985-2400 x32382
1655 Scott Blvd. Fax: (408) 296-3256
Santa Clara, CA 95050 E-mail: mill...@ul.com
_________________________________________________________________
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Jun 12 20:22:19 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 12 Jun 1996 11:18:36 -0400
From: THOMAS LADD <tl...@telenet.com>
We have several openings for experienced Safety/EMC/Type Approval
certification specialists. We are looking for graduate EE's with five to
ten years of experience. A background in data communications equipment
is a plus but not manditory. Resumes can be sent to me
thomas.a.l...@adn.alcatel.com
----- End Included Message -----
----- Begin Included Message -----
>From 76660.2...@compuserve.com Wed Jun 12 11:29:10 1996
List-Post: emc-pstc@listserv.ieee.org
Date: 12 Jun 96 11:24:49 EDT
From: Bachant <76660.2...@compuserve.com>
To: John Freudenberg <jo...@ces.teradyne.com>
Subject: Re: job posting for NPSS
Content-Length: 327
from:Arlene Greenstein
RE: HOMOLOGATION ENGINEER
Position requires 5-7 years experience designing microprocessor based analog
voice grade modem products for global markets. Experience with international
product safety, EMC, and telecom compliance standards is critical.
Contact A. Greenstein & Company at fax #617-769-9269
----- End Included Message -----
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Tue, 11 Jun 1996 22:03:55 -0400 (EDT)
To: t...@world.std.com
Subject: Compliance and Homologation position open
From: "Chaisson, George" <gchai...@faxint.com>
Subject: Compliance and Homologation position open
Fax International
Burlington Ma. 01803
NEW OPENING!!!!!
JOB DESCRIPTION
Product Certification and Homologation Engineer
The Big Picture:
Fax International is a fast paced, worldwide, document exchange
communications company servicing both fax and binary file formatted
documents. With worldwide headquarters in Burlington, we have operating
sales and service units worldwide and will be expanding business in new
countries over the next several months. The environment is high growth,
hands on, can do and provides the rewards of working with leading edge
communications protocols. In each new country where we operate, product
compliance is initiated and completed as a leading start-up activity.
The Opportunity:
We are looking for an accomplished individual that can accept technical
challenges, to plan and schedule all the necessary activities to achieve
product homologation in Fax Internationals expanding sphere of international
operations. This role will lead and influence the resources necessary to
achieve homologation of our products, initiate product test and compliance
plans, collect and present all of the necessary information and data to
influence product design. The successful candidate will enjoy working in
multi-cultural environments, working independently, and using past
accomplishments to leverage the tasks at hand. This individual will enjoy
being the hub of information for the homologation status of our products in
each of our countries of operation.
The Requirements:
The successful candidate will have an engineering degree EE, QE. or ME, 3
years product development experience, and have demonstrated attention to
detail and ability to manage tight schedules. The right candidate will be a
master at organizing documents and technical material for easy and reliable
access. You must be able to plan homologation and product certification
events, influence priorities, interpret product design characteristics and
offer persuasive support for test strategies. You must be comfortable in
multi-cultural environments and have outstanding written and verbal skills.
If your interested
Contact: George Chaisson, Product/Inventory Manager (617) 564-6787
E-mail gchai...@faxint.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Jun 5 11:23:40 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 5 Jun 96 09:32:48 EDT
From: "Brought to you by Johnson's Vax" <john...@lesreg.enet.dec.com>
To: emc-p...@ieee.org
Cc: john...@lesreg.enet.dec.com
Subject: Looking for fire investigators
A lawyer I know (not at Digital) is looking for a fire investigator and
expert witness who specializes in electrical products.
This seems to be the logical place to inquire. I would appreciate any
inputs and will collate and repost what I get.
Bob Johnson
Digital Equipment Corp.
---------------------------------------------------------------
>From owner-emc-p...@mail.ieee.org Wed Jun 5 12:57:56 1996
From: bay...@aol.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 5 Jun 1996 11:19:43 -0400
To: john...@lesreg.enet.dec.com, emc-p...@ieee.org
Subject: Re: Looking for fire investigators
Hi Bob,
I do Consultant/Expert Witness work. I will be glad to forward my CV if you
would provide additional information. I am also a member of the Board and VP
of the Forensic Consultants Association of Orange County, an organazation of
approximately 70 forensic experts in numerous fields. I can also provide
member information.
Looking forward to hearing from you.
Regards,
Charlie Bayhi
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Thu May 30 22:16:43 1996
From: bay...@aol.com
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 30 May 1996 20:42:13 -0400
To: emc-p...@ieee.org
Subject: Semi-S2
I appreciate all the referrals for the Semi-S2 evaluation. We should be able
to find someone that can do the job for us. Since I got so many, I have
summarized them so that anyone can put them in their library for future
reference. Some reference the same company, but provide some additional
info.
Thanks again!!
Charlie Bayhi
--------------------------------------------------------------------------
Inchcape's SSF office call Pavol Breder at 415-871-1414
Consultant - Pete Perkins p.perk...@ieee.org (503) 452-1201
TUV PS The main contact is Jill Geppert at 508 739 7065.
ETL Testing Laboratories
South San Francisco, California
Contact Mark Krauss @ 415.871.1414
Environmental and Occupational Risk Management (EORM)
San Jose, California
Contact Marc Weibel @ 408.321.2850
Ta Din
Mr. Robert Dean, President
1332 Main Street
Hanover, MA 02339
(617) 878-7498
Consultant - treph...@aimnet.aimnet.com (Thomas N. Cokenias)
Tom Cokenias
ph 415-493-4219
fax 415-813-1255
TUV Product Service - Mark D'Agostino can do this work in conjunction with a
Machinery Directive evaluation. He is at 508 739 7016
Inchcape Testing Services is a certified laboratory for Semi S2 Evaluations
and Certifications. If you would like more information or a quote, please
call Barry Stangline at our Beaverton, OR office at 503-626-6694 or fax him
at 503-626-7328.
TUV Rheinland-San Diego office Patty Elliot and Chicago office Dave Lokbeck.
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Mon May 20 23:03:32 1996
From: rtflind...@aol.com
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 20 May 1996 21:39:13 -0400
To: emc-p...@ieee.org
Subject: EMC Tech Position
Sender: owner-emc-p...@majordomo.ieee.org
Reply-To: rtflind...@aol.com
Compatible Electronics, an industry leader in EMC/Product Safety
testing and Consulting is looking for an entry level or intermediate
level EMC test technician. The position will be located at our South
Orange County Facility in Southern California. It is a full-time
salary position. The applicant should have an AS in Electronics (Or
equiv.), have excellent customer relations skills, and be available for
overtime on a regular basis.
Interested parties can mail, fax, or Email their resume to:
Compatible Electronics
19121 El Toro Road
Silverado, CA 92676
ATTN: Mitch Gilbert
FAX:(714)589-7700
PHONE:(714)589-0700
EMAIL: rtflind...@aol.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Fri May 17 14:07:09 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 17 May 1996 09:23:33 -0700
From: Jim Wiese <jim.wi...@adtran.com>
Organization: ADTRAN, Inc.
ADTRAN, Inc., located in Huntsville, Alabama is expanding it
regulatory compliance department.
ADTRAN is a manufacturer of advanced transmission products which are
utilized by the Regional Bell operating companies, GTE, large and small
businesses and residential customers. The basic product lines involve
the following technologies; ISDN (integrated services digital network),
HDSL (high bit rate digital subscriber loops), T1, T1 Subrate, and DDS
(digital data service). Currently ADTRAN employs approximately 900
people.
The regulatory engineering department is accepting resumes for a
qualified safety, Part 68, and Bellcore Engineer or Technician.
Experience with evaluations and testing of UL 1459, UL 1950 2nd & 3rd
Editions, and/or Bellcore GR-1089-CORE & Bellcore GR-63-CORE is
REQUIRED. Experience with FCC part 68, Industry Canada CS-03, and FCC
Part 15 would be helpful. Applicants must be able to locate to
Huntsville, and travel occasionally to independent test labs.
Applicant MUST be a team player!
Educational experience should include a degree in electronics, physics,
or equivalent.
Resumes should be sent by June 1, 1996 to:
Jim Wiese Regulatory Compliance Engineer ADTRAN, Inc. 901 Explorer
Blvd. Huntsville, AL 35806-2807 E-Mail jim.wi...@adtran.com
205-971-8250 (fax) ADTRAN is an equal opportunity employer
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Wed May 15 12:25:17 1996
X-Authentication-Warning: europe.std.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 15 May 1996 08:56:46 -0700
From: Scott Roleson <sc...@hpsdde.sdd.hp.com>
To: t...@world.std.com
Subject: Telecom Job, Boise, Idaho
Cc: guy_w_goodl...@hp-boise-om2.om.hp.com
Sender: treg-appro...@world.std.com
Reply-To: t...@world.std.com
Content-Length: 366
One of Hewlett-Packard's divisions in Boise, Idaho is looking for an
experienced telecom regulations engineer knowledgeable about world-wide
homologation of analog terminal equipment. This is a full-time regular
employee position. For more details, contact:
Guy Goodlett, Hewlett-Packard Company, +1-208-396-2070
E-mail: guy_w_goodl...@hp-boise-om2.om.hp.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed May 8 04:25:41 1996
From: Richard Nute (QA) <ri...@bpo.hp.com>
Subject: Product Regulations Expert in Hewlett-Packard Barcelona
To: emc-p...@ieee.org (Product Safety Technical Committee)
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 8 May 1996 08:32:43 +0200 (METDST)
Cc: judith_apari...@hp-iberia-om2.om.hp.com
PRODUCT REGULATIONS EXPERTS
IN HEWLETT-PACKARD BARCELONA DIVISION (SPAIN)
.............................................................
May,7 1996
Hewlett-Packard Barcelona Division (Spain) is looking for 2 Product
Regulations Experts (Senior & Junior) for one of the most important
business in HP, the Large Format Printers Division. These persons will
be the responsibles for all product regulations projects inside and
outside the Division. We are looking for a person with a Bachelor
degree in Engineering, and minimum of one year directly related HP
experience; or at least two years directly related non-HP experience
in Safety and EMC standards concerning Information Technology
Equipment, experience working with regulatory agencies, experience in
Product Stewardship (Recyclability, Reuse, Design forDisassembly and
for the Environment) and good written and oral English communications
skills.
If you are interested please send us your resumee at:
judith_apari...@hp-iberia-om2.om.hp.com
Recruiting & Selection
Hewlett-Packard Barcelona Division
Avda Graells, 501
08190 Sant Cugat del Valles (Barcelona)
-Spain-
fax: 34-3-582.13.39
----- End Included Message -----
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Sun, 05 May 1996 19:18:47 -0700
To: emc-p...@ieee.org
From: Semyon Grozman <sgro...@cisco.com>
Subject: Job opening
Cisco Systems in San Jose, CA has an opening for an EMI design engineer.
Digital and Analog design experience is highly desirable. If you are interested,
please reply to this e-mail
Semyon Grozman
Semyon Grozman Phone (408)526-8334
Manager, FAX (408)526-5504
Regulatory Compliance email: sgro...@cisco.com
Workgroup Business Unit
Cisco Systems, Inc.,
170 W.Tasman Dr.
San Jose, CA 95134-1706
----- Begin Included Message -----
---- End Included Message -----
>From Dan_Drumheller/US/3com%3...@smtp1.isd.3com.com
To: jo...@ces.teradyne.com
List-Post: emc-pstc@listserv.ieee.org
Date: 3 May 96 18:13:46 EDT
Subject: Re: consultant or middleman man for UL, CSA, EMC, Bellcore, CE
John,
How are you doing? I appreciate you keeping me on distribution. It's all real
good stuff. Sorry to see Dave Lorusso go; I will see him next Friday. Also,
I am looking for a consultant or middle man for UL, CSA, EMC, Bellcore, CE, and
other. Do you know of anyone that could help us? At this time, I am the
Regulatory expert; the man in charge; the chief cook and bottle washer person
here at ARTEL. I have all the answers, and am God's gift to the organization.
Jack Schwarzenbach would be proud.... are you smiling, or better yet, rolling
in the aisle? I miss that!
Are you aware of the Motorola Party next week? Are you going? Love to see you
there... If you need details, let me know. Also, I can be reached at (508)
787-3383.
In any case, I look forward in hearing from you..
Dan
----- End Included Message -----
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 03 May 1996 11:10:05 -0400
To: jo...@ces.teradyne.com (John Freudenberg )
Volume 10, Issue 2 April, 1996 NPSS Newsletter
Employment Opportunity
Varian Ion Implant Systems
Systems Engineer (product safety) - Varian Ion Implant Systems is
looking for candidates with a BS in Engineering or Physics and 4-6
years of design and product safety experience at the systems levels, to
provide systems and safety expertise for design and development of
electromedical equipment. Contact Bob Norton, Varian Ion Implant
Systems, 35 Dory Road, Gloucester, MA 01930 at (508) 282-2243
----- End Included Message -----
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 02 May 1996 11:10:05 -0400
To: jo...@ces.teradyne.com (John Freudenberg )
fax from Tony Fucci at TUV Rheinland
Senior Electrical Engineer
Motorola ISG, located in Mansfield MA currently has an opening for a
senior electrical engineer to design, debug, and evaluate complex
hardware and software for data communication products and systems.
Experience with domestic and international products approvals process,
regulatory authorities, stamdards bodies and product assessment labs
for analog as well as digital products is preferred. Experience in HW
and SW implementation of telecom interface functionality with exposure
to product certification in various global markets. Experience with
Int'l product safety, EMC and telecom standards with emphasis in the
interpretation of these standards for the purpose of defining product
functionality as well as HW/SW design requirements.
Applicants may send resume to:
Joe Jurasek
Advanced Sourcing Group
Motorola ISG
20 Cabot Blvd.
Mansfield, MA 02048
fax: 508-339-3752
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 02 May 1996 11:10:05 -0400
To: jo...@ces.teradyne.com (John Freudenberg )
From: Bruce Langmuir <bruce_langm...@bose.com>
Subject: Re: Job Postings List
John:
Many thanks for the reply below. Your job postings distribution list could
possibly be useful in the future for our group as Bose continues to grow and
thus job openings may occur. In the future it sounds like your list will be
even larger.
Regards,
Bruce
At 09:56 AM 5/2/96 EDT, you wrote:
>Both the job postings and the distribution list are public information
>on the internet and even if they weren't, I would be happy to share
>them.
----- End Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: 30 Apr 96 08:25:00 -0700
To: emc-p...@ieee.org
Subject: Job Opening in Northern Calif
Sender: owner-emc-p...@majordomo.ieee.org
Reply-To: volgstadt_ro...@tandem.com
Ladies and Gentlemen,
A friend requested that I post the following:
Two Regulatory positions available in Northern California area
(Rohnert Park - north of San Francisco - in Sonoma County).
First position: Product Safety Engineer. Second: EMC Engineer.
Prefer safety engineer to have some telecom approvals experience
and prefer that the EMC engineer have some Bellcore experience.
Contact Jag Banerjee at 707-588-5957; fax 707-588-8653
Regards.
----- Begin Included Message -----
From: Cynthia Pleach <cynth...@dgii.com>
To: treg <t...@sdd.hp.com>
Subject: telecom engineer
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 18 Apr 96 16:24:00 C
Hello all!
I have an open req for an engineer. I am looking for someone that
has experience with approving telecom products world wide. This
would including scheduling safety, emissions, and immunity testing
and conducting some telecom tests. The most important experience
is the telecom. I would consider a candidate without safety,
emissions,and immunity background.
The business unit that the engineer would support is developing
Basic Rate and Primary Rate ISDN. The PRI is over E1/T1.
This would be the most useful experience, but other types of
telecom experience would be considered. IE if the candidate
has experience with analog approvals but not ISDN they would
still be considered.
The job is scheduled to be based in Minnesota, but we have
engineering locations in Huntsville, Alabama and Torrance
California that I would consider locating the candidate at if
MN is a problem.
I can be contacted at:
Phone 612 912 3206
fax 612 912 4954
email cynthia_ple...@dgii.com
Cynthia Pleach
Manager, Homologation
Digi International
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Mon Apr 29 21:28:57 1996
Comments: Authenticated sender is <mi...@allware.com>
From: "Mike Violette" <mi...@wll.com>
To: emc-p...@ieee.org
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 29 Apr 1996 14:48:15 +0000
Subject: Job Posting
Job Postings in Washington DC Area.
We are interested in filling technical positions in the
field of Product Safety.
Summarized Job Descriptions:
1. Safety engineer/technician: Perform safety evaluations, including
hands-on bench work, customer and agency liason and technical report
writing. Proficiency with PC/word processing programs (Word 6.0,
Xcel, etc.) a must; good technical writing skills mandatory. Thick
skin and a psychology degree a plus.
Salary and position commensurate with experience and ability. Attitude,
flexibility, and willingness to tackle new projects necessary.
Fax Joe @ 301 417-9069, or e-mail at j...@wll.com.
----- End Included Message -----
----- Begin Included Message -----
>From treg-appro...@europe.std.com Wed Apr 24 18:09:16 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 24 Apr 1996 17:41:08 -0400 (EDT)
From: treg-appro...@europe.std.com
X-Authentication-Warning: europe.std.com
To: treg-outgo...@europe.std.com
Content-Length: 3759
Subject: Two International Engineering Positions at Natural MicroSystems
Natural MicroSystems is the technology leader in the exciting field of
computer-based telephony. Natural MicroSystems develops
state-of-the-art enabling technologies for a growing international
network of OEMs, VARs, systems integrators, and telephony service
providers. Our products are based on cutting edge digital signal
processing technology, and provide voice recording and playback, fax
transmission, speech recognition, and text-to-speech conversion. Our
customers use these technologies to build high-value voice, fax, and
video applications for deployment by huge telecommunications providers
and small start-up firms alike. We are looking for team players who
excel in their fields, enjoy a fast-paced environment, and look forward
to overcoming technical challenges.
Please Submit your resumes to :
Michael Motta
Manager International Engineering Group
mike_mo...@nmss.com
or telephone: +508-650-1373
Position #1: Analog Telco Design/Approvals Engineer:
Develop telecommunications products for international markets. This
position is focused on analog telco approvals and physical layer
regulatory compliance. It will combine design activities with
compliance testing activities. The position involves approximately 15%
international travel. The successful candidate will also support other
engineering groups in creating designs that conform to international
regulations. The position requires the ability to create schedules and
test plans for product testing. Also important is the ability to work
with administrative staff to scrupulously maintain regulatory folders
for approval certificates, test reports, and specifications.
A summary of specific requirements follows:
BS EE, Physics, or Math (advanced degree a plus) with 5+ years of
experience Requires Experience in international Telco approvals
including familiarity with international regulatory specifications and
approvals testing experience Requires Experience in real-time system
design and development Requires some analog hardware design experience
and the ability to program in C
Position #2: Digital Protocol Design/Approvals Engineer:
Develop telecommunications protocols for international markets. This
position is focused on digital signaling protocols. It will combine
protocol design activities with compliance testing activities. The
position involves approximately 15% international travel. The
successful candidate will also support other engineering groups in
creating designs that conform to international regulations. The
position requires the ability to create schedules and test plans for
product testing. Also important is the ability to work with
administrative staff to scrupulously maintain regulatory folders for
approval certificates, test reports, and specifications.
A summary of specific requirements follows:
BS EE, Physics, or Math (advanced degree a plus) with 5+ years of
experience Requires experience in international Telco approvals
including familiarity with international regulatory specifications and
approvals testing experience.
Requires experience in real-time system design and development.
Requires strong software development capabilities and C language
programming for PC based systems Requires familiarity with telco
digital protocols such as Common Channel Signalling protocols such as
ISDN and Channel Associated Signaling Protocols such as MFC-R2.
----- End Included Message -----
----- Begin Included Message -----
XXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
>From si...@kalvin.dechub.lkg.dec.com Fri May 17 16:53:57 1996
Organization: Digital Equipment Corp.
To: <jo...@ces.teradyne.com>
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 17 May 1996 16:39:08 -5
Subject: Re: NPSS => 32 job opportunities for compliance engineers
Reply-To: si...@lkg.dec.com
> Mon, Apr 22 1996 From: st...@emc.com (Cliff Stark)
John,
You may want to put an X next to this one -- I got this job. The
starting day is June 3.
Regards,
Leo
_________
Leo Simon si...@lkg.dec.com
----- End Included Message -----
----- Begin Included Message -----
>From fot...@ccmailpc.ctron.com Wed Apr 17 16:12:49 1996
From: fot...@ccmailpc.ctron.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 17 Apr 96 16:15:48 EST
Encoding: 1073 Text
To: jo...@ces.teradyne.com
Subject: Job Posting
Content-Length: 1047
Hi John,
I have a job opening that I would love to have get exposure at the
NPSS meeting. The job is a Senior Compliance Engineer for Product
Safety and the description is:
Product safety testing of all Cabletron products; design consulting
with hardware and power supply design engineers; research into foreign
approvals and requirements; development of product safety test plans;
establish a certified in-house product safety test lab.
Requires BSEE or equivalent; product safety experience; excellent
knowledge of regulatory requirements; and excellent communication
skills.
The job is at Cabletron in beautiful and centrally located Rochester,
NH.
I should be the contact person at Cabletron and my phone number is
603-337-2822; my fax number is 603-337-1764; my e-mail is
fot...@ctron.com.
Thanks alot for the opportunity.
Ron Fotino
Principal Compliance Engineer
Cabletron Systems, Inc.
----- End Included Message -----
----- Begin Included Message -----
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 19 Apr 1996 16:07:00 +0000
From: MLA!bco...@medlaba.attmail.com (Bill Corry)
Subject: Re[2]: follow up on 17 job postings within the last six mont
To: jo...@ces.teradyne.com (John Freudenberg)
John: Thanks for the job postings. Please feel free to post the
notice at the monthly meeting. You should have received another
message from an Ian Shaw at my company who is the real person who is
looking for a safety officer. He should have sent you a better
description of the position as well as his address.
I certainly appreciate your help.
Thanks again,
Bill Corry
>From MLA!bco...@medlaba.attmail.com Thu Apr 11 12:06:04 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 11 Apr 1996 11:58:00 +0000
From: MLA!bco...@medlaba.attmail.com (Bill Corry)
Subject: Job Posting for Safety Engineer
To: jo...@ces.teradyne.com
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Length: 1072
Dear Mr. Freudenberg:
We are looking for a Safety Engineer familiar with medical laboratory
environments in a clinical setting. Must be intimate with all
regulatory requirements and, more importantly, with everyday general
safety practices. Items we are concerned with are; mechanical safety
hazards, bio hazards, and ergonomic issues (ie., max practical weight
of system and lifting methods). We are looking for a practical
engineer who can take a look at the system as designed and point out
areas of improvement.
I was hoping that as an officer of the The Northeast Product Safety
Society you might know of qualified candidates or might have a job
postings board where we could post a notice for this position. If you
could help on this matter I can be reached by phone at 914-749-8727 or
by email at mla!bco...@medlaba.attmail.com
Thanks,
Bill Corry
Medical Laboratory Automation
270 Marble Avenue
Pleasantville New York, 10570
----- End Included Message -----
----- Begin Included Message -----
XXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
List-Post: emc-pstc@listserv.ieee.org
Date: Sat, 18 May 1996 15:56:00 +0000
From: Naftali Shani <naftali.shani.0500...@nt.com>
To: John Freudenberg <jo...@ces.teradyne.com>
Subject: Re: NPSS => 32 job opportuni
Reply to: RE>NPSS 32 job opportunities for compliance engineers
John,
Thanks for the update (I understand Hal was your customer).
Please modify the + to X as both positions are filled.
Keep the good work you are doing for humanity.
Have a nice and long weekend (here it is Victoria Day, nice and sunny).
Regards,
Naftali
XXXXXXXXXXXXXXXXXX NEW POSITION OPENING SOON XXXXXXXXXXXXXXXXXXXXXXXX
List-Post: emc-pstc@listserv.ieee.org
Date: 23 Apr 1996 14:45:43 -0400
From: Naftali Shani <naftali.shani.0500...@nt.com>
Subject: Re: follow up on 17 job pos
To: John Freudenberg <jo...@ces.teradyne.com>
Reply to: RE>follow up on 17 job postings within the last six months
Hi John, How's life after Motorola Codex?
Yes, I'm going to fill the position (actually, I just received the green
light for a 2nd helper!) very shortly. Thanks for the inquiry.
Naftali
>From owner-emc-p...@mail.ieee.org Thu Mar 28 20:47:22 1996
From: Naftali Shani <naftali.shani.0500...@nt.com>
To: "emc-pstc ieee.org" <emc-p...@ieee.org>,
"treg SDD.HP.COM" <t...@sdd.hp.com>
Subject: Job posting #5654
To whom it may be of interest!
This is a job posting we would like to share with interesting
candidates. The position is geared toward an entry-intermediate level
engineer, preferably with prior experience and/or knowledge in the
areas associated with Product Integrity (in particular, we are looking
for experience in or exposure to EMC disciplines). The challenge is to
interact with peers and higher levels (engineers and managers)
effectively and efficiently, gather information (such as regulatory
requirements world-wide), assess activities and then carry out these
activities in a timely fashion. Prospective candidates may send their
letters to the address shown below (fax or e-mail are also acceptable),
and should reference Job # 5654.
Regards,
Naftali Shani
Nortel, Dept. S612
8200 Dixie Road
Brampton, Ontario
Canada L6T 4B8
Voice: +1-905-452-4876
Fax: +1-905-452-2905
e-mail: naftali.sh...@nt.com
*************************************************************
Job Title: Technical contributor, Product Integrity engineer (Job # =
5654).
Reports To: Manager, Physical Design & Product Integrity.
Department: Physical Design & Product Integrity.
Location: Nortel in Brampton, Ontario.
Summary of key responsibilities and functions:
- Provides engineering/technical support to product and engineering =
development groups.
- Report progress on assigned task to senior engineers and managers.
- Planning and coordination of tasks under supervision of senior =
engineer.
- Maintain awareness of and contribution to metrics within =
technical/group areas.
- Customer liaison at peer level.
- Technical reporting/presentation to senior engineers and managers.
Decision making
- Has specific influence upon the method by which preset technical =
objectives are met.
- Implements actions derived by management and senior engineers and makes =
technical recommendations for their decision.
- Uses precedents set by on-the-job experience and management to guide =
the derivation of technical recommendations.
- Decisions affect outcome of objectives at task level within 3 month =
time frame.
Problem solving
- Performs technical analysis functions within a specific area of =
expertise.
- Breadth of analytic contribution generally limited to guidance of a =
specific technical area within a team.
- Provides the primary team contribution in a specific technical area =
under supervision of a senior engineer.
- Maintains awareness of and communicates impact his/her work has on =
other technical areas.
Leadership impact
- Little/no direct functional or direct guidance of peers.
- Shares technical findings with peers and participates in the =
development of functional group knowledge under direction of senior =
engineers.
Knowledge
- 0-3 years' experience in Product Integrity or equivalent area.
- Minimum of Bachelor's degree in Electrical Engineering or similar =
discipline(s).
Interpersonal skills
- Maintains contacts with peers in same technical area.
- Developing contacts with peers outside immediate organization.
- Understanding of and supports goals of functional/technical group.
- Promotes positive team environment.
- Able to work under time constraints.
----- End Included Message -----
----- Begin Included Message -----
XXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
The following employment ad was in Sunday's San Jose Mercury News
on 9-Jun-96.
PRODUCT SAFETY / EMC ENGINEER
Requires a BSEE or equivalent and 7+ years experience in compliance
engineering. Working knowledge of all international and industry
product safety/EMC standards applicable to ATE (e.g. CISPR 11, IEC204,
IEC555, IEC801, IEC950, IEC1010, SEMI-S2, etc.) a plus. Responsible
for Mfg DofC to Machinery and/or Low Voltage Directives; Mfg DofC to
EMC Directive; NRTL Listing; EH&S certificate to SEMI standards; TUV
Safety Certificate and TUV EMC Certificate on each product.
I am currently recruiting two west coast product safety/compliance
engineers probably one for Southern CA in Augoura Hills and one for
Northern CA in San Jose & Walnut Creek. See announcement included below.
XXXXXXXXXXXXXXXXXX NEW POSITION OPENING SOON XXXXXXXXXXXXXXXXXXXXXXXX
List-Post: emc-pstc@listserv.ieee.org
Date: Tue, 26 Mar 96 11:33:31 EST
From: cook@cesfs1 (Frank Cook )
Subject: new hire announcement
Cc: jo...@ces.teradyne.com
It is my pleasure to welcome Joe Pomata as the product safety /EMC
compliance engineer supporting ICD.
In this new position, Joe will:
-formalize ICD's requirements for product safety and EMC
-participate in design reviews on ICD products
-make certification applications for ICD products
-generate product safety and EMC test plans
-perform/witness product safety and EMC testing on ICD products
-deliver the applicable certification certificates on ICD products,
such as Mfg declaration of conformity to European Directives; TUV
safety and EMC certificates; Listing by a USA Nationally Recognized
Test Lab; and Environmental Health & Safety certificate to SEMI-S2.
Joe Pomata brings with him a BSEE degree from NYIT and an extensive
background of 10+ years of regulatory compliance engineering at the
following companies and/or agencies: American Power Conversion, Digital
Equipment Corporation and Underwriters Laboratories.
Joe Pomata will be reporting to John Freudenberg in Corporate Product
Safety/EMC. John Freudenberg joined Teradyne on October 1995. John has
a BSEE degree from NJIT and his previous experience includes 18 years
of various compliance positions at the following companies and/or
agencies: TUV Rhineland of NA, Motorola ISG (Codex), Kodak Electronic
Pre-Press Div. (Atex), Digital Equipment Corporation, Factory Mutual
and Underwriters Laboratories. John was primary person responsible for
Motorola ISG's certification partnership programs: CSA Category and UL
Compass programs. John also built and managed Motorola ISG's FCC/CISPR
open field test site with emissions and immunity test capability.
Please join me in welcoming Joe Pomata and wishing him well in his new
position.
FYI: Teradyne still has two open req's for product safety engineers
approved on 20-Mar-96 for California: 1) Teradyne Memory/VLSI Div's in
Augoura Hills north of LA and 2) Teradyne Megatest in San Jose south of
SF & Teradyne ATWC in Walnut Creek, CA.
--------------------------------------------------------------------
Teradyne Inc. is a one billion dollar manufacturer of semiconductor and
board test equipment. Teradyne has recently filled its Corporate
product safety position and its East Coast engineering product safety
position. Now Teradyne is actively recruiting for its West Coast
engineering product safety position supporting four divisions in three
locations: Augoura Hills (northeast of LA), San Jose and Walnut Creek
(northeast of SF).
-- Provide consulting services regarding IEC204, IEC950 and/or IEC1010
standards necessary to compile a technical data file to make a
Manufacturer's DofC to the Low Voltage Safety Directive and/or the
Machinery Directive and apply the "CE Marking".
-- Provide project management services as the liason between
certification suppliers and Teradyne for engineering project by VLSI
Div., Memory Div, Megatest Div. and Automatic Test Div.
-- BS EE with 10+ years experience product safety consulting with
engineering on international product safety standards. Candidates
should posess the unique technical, political, and administrative
skills necessary to be a product safety engineer professional:
-- Candidates must have operated within a concurrent engineering /
proactive design review environment resulting in first time
certifications for a minimum of 5+ years.
-- Design level EMC expertise a plus
Resumes can be mailed, faxed or E-mailed to my attention:
John M Freudenberg
Teradyne Inc.
321 Harrison Ave.
Boston, MA 02118-2238
phone 617-422-2669
fax 617-422-2801
e-Mail jo...@ces.teradyne.com
----- End Included Message -----
----- Begin Included Message -----
XXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Subject: Job Posting - N.E. Mass. area
Author: "Mike Mertinooke" <mmert...@modicon.com> at internet
List-Post: emc-pstc@listserv.ieee.org
Date: 3/22/96 11:37 AM
Hi;
My boss recently packed up and left for (much) greener pastures.
Since I am not at all interested in his position, we are looking for
a replacement. This job is currently advertised in the Boston
Globe. If you would like details, or to discuss the position, please
reply to <mmert...@modicon.com>.
My own UNOFFICIAL, UNAUTHORIZED, PARAPHRASED,
and irreverent description is as follows:
Title: Product Safety Specialist
Grade: "lower-middle management" level - i.e. obscenely large
salary, big enough that drug pushers and neurosurgeons
will want to play golf with you. Buy a Lexus. Cash.
Company Background:
A $100M wart on a multi-gigabuck international pickle. Design
and manufacture light and heavy industrial control equipment.
Stable company, loyal clientele. Very heavy emphasis on
reliability and ruggedness. NICE people (but some of us are
kinda wierd) - NICE environment as long as you really do
know how to do your job. Major emphasis on competence.
Heavily political but what else is new?
Duties:
- General Regulatory MANAGEMENT. This is a 2-person
department doing the work of 10 people. You the Boss. Me
the Flunky. We both paddle the boat, but you steer.
- Safety, EMC Directive, LV Directive submittals and support.
>>> Willing to get involved in the Product Liability field. <<<
- clean hands. You wear the suit, go to meetings, play politics.
Collect the big bucks. I stay out back burning up perfectly good
equipment and jollying the FUS inspectors.
- UL, CSA, Factory Mutual, Lloyds Register, TUV - the usual mix.
The screeners are looking for 10 years in the Regulatory field.
- Iron stomach. Able to play World Class politics and win.
- The guy you'll replace is a former UL engineer, but your
expectations will be considerably higher. Got it?
- Must be able to speak with believable authority on all
international regulations related to Industrial Control Products.
Quote chapter and verse, including cross-references, drafts
of unpublished standards, and the middle name of everybody
on every relevant Technical Committee.
-Mike Mertinooke-
The following is an attached File item from cc:Mail. It contains
information that had to be encoded to ensure successful transmission
through various mail systems. To decode the file use the UUDECODE
program.
----- End Included Message -----
----- Begin Included Message -----
>From Gary S. Bell Associates
BioTech/Heathcare Executive Recruiters
55 Harristown Road
Glen Rock, NJ 07452-9998
(p) 201-670-4900
(f) 201-670-4940
March 5, 1996
Mr. John Freudenberg,
We have an opening for a Safety Engineer with a large pharmaceutical
company in New England. The engineer will be responbsible for safety
analysis, compliance with OSHA on installation, construction, fire
safety, walk surfaces, first aid, gas cylinder programs, etc. Salary
is up to $57,000 plus extensive fringe benefits. I would appreciate it
if you can recommend someone to me. Thank you for your cooperation.
Allen B. Claire
Executive Vice President
----- End Included Message -----
----- Begin Included Message -----
>From kfount...@tuvps.com Wed Apr 24 11:22:52 1996
From: kfount...@tuvps.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 24 Apr 96 9:33:48 CDT
X-Priority: 3 (Normal)
To: <jo...@ces.teradyne.com>
Return-Receipt-To: <kfount...@tuvps.com>
Subject: Job Posting
X-Incognito-Sn: 602
X-Incognito-Format: VERSION=2.01a ENCRYPTED=NO
Content-Length: 910
Hello Mr. Freudenberg,
I work with Debbie Gorksi at TUV Product Service, St. Paul MN. She is
going to be out of the office for a while, so she asked me to reply to the
E-Mail she received below.
There is a possibility that there will be another position open (like the
one before, Entry - Level Engineer) in July.
I hope it is not too late to pass along this information.
Thank you,
Kristin Fountain
kfount...@tuvps.com
XXXXXXXXXXXXXXXXXX NEW POSITION OPENING SOON XXXXXXXXXXXXXXXXXXXXXXXXXXX
>From owner-emc-p...@mail.ieee.org Mon Mar 4 20:10:48 1996
From: dgor...@tuvps.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 14 Feb 96 10:48:50 CST
X-Priority: 3 (Normal)
To: <emc-p...@ieee.org>
Subject: Product Safety Engineer or Technician
TUV PRODUCT SERVICE has an immediate opening for an experienced, or entry
level, Product Safety Engineer. For entry level applicants, the position
will require a year to be completed as a Product Safety lab technician.
The requirements for the position are as follows:
-Electrical Engineering degree preferred
-Experience with the following standards preferred:
IEC EN VDE
DIN UL AS/NZS
Please email resumes to: dgor...@tuvps.com
or mail/fax resumes to: Debbie Gorski Fax: 612-638-0285
TUV PRODUCT SERVICE
1775 Old Highway 8
New Brighton, MN 55112
TUV PRODUCT SERVICE is an Equal Opportunity Employer
----- End Included Message -----
----- Begin Included Message -----
>From ma...@bnr.ca Thu Feb 29 18:02:34 1996
Content-Identifier: Nortel EMC Jo...
From: "marko (m.l.) radojicic" <ma...@bnr.ca>
Sender: "marko (m.l.) radojicic" <ma...@bnr.ca>
To: t...@sdd.hp.com
Subject: Nortel EMC Job Advertisement
Content-Length: 1367
Greetings everyone. The following job ad should be of interest to
some members of this group:
Job Posting: EMC/RF Engineer
Nortel (Northern Telecom) has a senior-level position open for an
EMC/RF engineer in our Research Triangle Park (RTP), NC location.
We are searching for a person familiar with EMC analysis
techniques and tools (PCB and System Level) and EMC standards (FCC
part 15, FCC part 22, EN55081/82, IEC 1000 series, etc.). A sound
background in RF engineering and design, including mixers/IF
circuits, bandpass filters, etc. would be an asset as would
familiarity with telecom and cellular systems, architectures and
protocols.
The position will be reporting into the Enterprise Networks
Integrity group which is responsible for the global development of
product in the areas of EMC, safety, mechanical integrity,
environmental integrity, and H/W reliability.
Nortel offer excellent compensation and benefits as well as the
opportunity to live in the RTP area which has been recognized by
Money magazine (and a lot of other people!) as one of the best
areas to live in the USA.
For confidential consideration, please fax your resume to:
1-800-546-8092 (Attn: Job # ENA518INT).
Or if you prefer, mail to:
Nortel, U.S. Resourcing Center
P.O. Box 13010
Job # ENA518INT
Dept. 1175/NTP
Research Triangle Park, NC
27709
----- End Included Message -----
----- Begin Included Message -----
>From tgr...@cisco.com Mon Mar 18 17:47:33 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 18 Mar 1996 13:34:37 -0800
From: tgr...@cisco.com (Cisco Systems, Inc.)
To: t...@sdd.hp.com
Subject: PTT/Homologation Design Engineer Opportunity at Cisco Systems!
Organization: Cisco Systems, Inc.
Content-Length: 1560
Path: tgrace-mac.cisco.com!user
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 10 Jan 1996 07:52:38 -0800
From: tgr...@cisco.com (Cisco Systems)
Newsgroups: ba.jobs.offered,us.jobs.offered,misc.jobs.offered
Followup-To: ba.jobs.offered,us.jobs.offered,misc.job.offered
Subject: US, CA, Cisco Systems, Design Engineer
Message-ID: <tgrace-100196075...@tgrace-mac.cisco.com>
Organization: Cisco Systems
Cisco Systems, Inc. is the leading global supplier of enterprise networks,
including routers, LAN and ATM switches, dial-up access servers and
network management software. These products, integrated by the Cisco
Internetwork Operating System (Cisco IOS) link geographically dispersed
LANs and WANs and IBM Networks.
We are looking for a PTT/Homologation Design Engineer to work with design
teams to develop products for the international telecom industry. Engineer
will provide guidance to hardware and software design to obtain
conformance to international homologation regulations. In addition,
develop test plans and schedules for product testing in-house and
overseas, work as liaison between international PTT organizations and the
development teams, as well as providing guidance to customers on
homologation related subjects.
Requires 5+ years experience in international homologation, strong
organizatinoal and presentation skills, and exertise with international
homologation specifications. Strong familiarity with future trends in
international homologation.
In interested please contact:
Tim Grace
Access Engineering Staffing
(408) 526-4758
(408) 953-3319 Fax
tgr...@cisco.com
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Wed Jan 31 17:31:36 1996
From: Doug Henderson 5954 <dhend...@chipcom.com>
To: emc-pstc <emc-p...@ieee.org>
Subject: EMC Job Posting
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 31 Jan 96 14:46:00 PST
Encoding: 13 TEXT
X-Mailer: Microsoft Mail V3.0
Sender: owner-emc-p...@mail.ieee.org
Reply-To: Doug Henderson 5954 <dhend...@chipcom.com>
X-Resent-To: Multiple Recipients <emc-p...@mail.ieee.org>
X-Listname: emc-pstc
X-List-Description: Product Safety Tech. Committee, EMC Society
X-Info: Help requests to emc-pstc-requ...@mail.ieee.org
X-Info: [Un]Subscribe requests to majord...@mail.ieee.org
X-Moderator-Address: emc-pstc-appro...@mail.ieee.org
Content-Length: 635
The following is a job posting for those interested.........
Integrated Systems Division of 3Com, located in Southborough, MA, has an
opening for an EMC Compliance Engineer. This position entails design
reviews, test planning, and testing of products for EMC compliance. The
individual should be familiar with EMC test methods, with an emphasis on
immunity testing, and should be able to do in-house pre-qualification
testing as well as EMC qualification testing at commercial test labs. BSEE
and 7+ years of related experience.
Interested individuals should contact David Perlmutter at:
david_perlmut...@3mail.3com.com.
----- End Included Message -----
----- Begin Included Message -----
>From jdonne...@encad.com Wed Apr 17 19:39:06 1996
X-Sender: jdonne...@encad.com
X-Mailer: Windows Eudora Version 1.4.4
Mime-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: jo...@ces.teradyne.com (John Freudenberg )
From: jdonne...@encad.com (Jim Donnelly)
Subject: Re: follow up on 17 job postings within the last six months
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 17 Apr 1996 16:38:23 -0700
Content-Length: 35223
Encad has hired someone for our opening. Tks, for your help. Jim Donnelly
XXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
>From owner-emc-p...@mail.ieee.org Thu Jan 18 14:27:31 1996
X-Sender: jdonne...@encad.com
X-Mailer: Windows Eudora Version 1.4.4
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: emc-p...@ieee.org
From: jdonne...@encad.com (Jim Donnelly)
Subject: Product Safety Engineer Posting
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 18 Jan 1996 08:58:10 -0800
>
>Pls post the attached Product Safety Engineer opening to your respective
job opportunities. I will write the ad out in case you have trouble
retreiving the attachment. Tks for your help.
>
>JOB TITLE: PRODCUT SAFETY ENGINEER
>LOCATION: SUNNY AND WARM, SAN DIEGO, CA
>
>Company Description: ENCAD, Inc., is a worldwide leading producer of
wide format color inkjet printers for the CAD & Graphic Arts Markets world
wide. We are located in sunny Southern California (San Diego). This
position would be in San Diego, CA.
>
>Job Description: Responsible for Regulatory affairs issues & for
coordinating the testing of products to obtain the necessary agency
approvals. 3+ years related experience, knowledge of & experience w/
regulatory agencies such as CE mark, UL, CSA, TUV, FCC, Energy Star &
others, consumer end product experience & OEM export to Europe knowledge.
Proactive self starter w/ strong communication skills, & PC literate.
Technical background in Electronics & printers is preferred. BS degree or
equivalent work experience.
>
>Send or fax your resume to:
>
Jim Donnelly
Employment Specialist
Encad, Inc.
6059 Cornerstone Ct. West
San Diego, CA. 92121
jdonne...@encad.com
619-677-5163
Fax 619-452-0891
Job Hotline 619-678-5363
WEB Page http://www.encad.com
----- End Included Message -----
----- Begin Included Message -----
>From direct.resour...@easynet.co.uk Mon Jan 22 12:14:39 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 22 Jan 1996 16:55:34 GMT
X-Sender: direct.resour...@mail.easynet.co.uk
X-Mailer: Windows Eudora Version 1.4.4
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: t...@sdd.hp.com
From: direct.resour...@easynet.co.uk (Direct Resources)
Subject: APPROVALS ENGINEERS
Content-Length: 548
HELP. I urgently need some advice on how to recruit an Approvals Engineer
in Scotland.
The position would be permanent and is a key role within a design department.
Salary will have no limit. Excellent opportunity for ambitious individual.
If anybody can help please give me a call on 01506 - 436900 or at the above
e-mail address.
Hope someone can help
Regards
Grant McCall
Direct Resources,
Delta House,
Carmondean Centre South,
Livingston,
West Lothian,
EH54 8PT.
Tel: 01506 436900
Fax: 01506 436657
e-mail: direct.resour...@easynet.co.uk
----- End Included Message -----
----- Begin Included Message -----
>From fdoming...@tuvps.com Wed Apr 17 18:43:44 1996
From: fdoming...@tuvps.com
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 17 Apr 96 17:57:13 MDT
X-Priority: 3 (Normal)
To: <jo...@ces.teradyne.com>
Subject: Re: follow up on 17 job postings within the last six months
Herr Freudenberg,
I am happy to say that we have hired an excellent engineer to fill our
product safety position.
Best Regards,
Frank Dominguez
TUV Product Service
XXXXXXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
>From lluttr...@tuvps.com Mon Jan 8 18:38:21 1996
From: lluttr...@tuvps.com
List-Post: emc-pstc@listserv.ieee.org
Date: Mon, 8 Jan 96 13:46:21 MST
X-Priority: 3 (Normal)
To: <t...@sdd.hp.com>
Subject: Positions Available
X-Incognito-Sn: 602
X-Incognito-Format: VERSION=2.01a ENCRYPTED=NO
Content-Length: 612
Product Safety Engineer
TUV Product Service has an opening in the Boulder Colorado office for an
experienced Product Safety Engineer. The candidate should have strong
experience in IEC standards including IEC 335, IEC 65 and IEC 1010.
Experience with EU Machinery Directive standards is also desirable. Should
be familiar with CB style test reports. The position requires a
self-starter with good communication shills and a positive attitude. Some
travel will be required.
Please send applications to Lyle Luttrell (lluttr...@tuvps.com) or Frank
Dominguez (fdoming...@tuvps.com) or fax 303-449-3004.
----- End Included Message -----
----- Begin Included Message -----
>From elizab...@gw.bbt.com Wed Apr 17 14:24:44 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 17 Apr 1996 14:12:41 -0400
X-Sender: elizabeth@mailserver
Mime-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
To: jo...@ces.teradyne.com (John Freudenberg )
From: elizab...@bbt.com (Elizabeth Maxedon)
Subject: Re: follow up on 17 job postings within the last six months
Content-Length: 17455
Thank you for the offer! We have filled our current opening and I do not
expect to have another Product Safety position in the near future. Thanks
again for the update and the offer.
Elizabeth Maxedon
BroadBand Technologies
XXXXXXXXXXXXXXXXXXXX POSITION FILLED XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
>From owner-emc-p...@mail.ieee.org Wed Jan 3 15:46:29 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Wed, 3 Jan 1996 13:14:30 -0500
X-Sender: elizabeth@mailserver
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: emc-p...@mail.ieee.org
From: elizab...@bbt.com (Elizabeth Maxedon)
Subject: NC - Job Opening - Product Safety Engineer
COMPANY PROFILE (BBT)
BroadBand Technologies, Durham, NC
Company is @350 employees and generated annual revenues near $30M in 1994.
Annual growth averaging 30%. BroadBand Tech has developed the only
commercially available, switched digital video, fiber to the curb system.
Our product has been selected exclusively by AT&T for their swtiched
Digital Video Product offering in North America and has already been
selected by Bell Atlantic and Southwsestern Bell for their fiber in the
home trials. BroadBand is also moving into Europe and Asia.
This is a excellent opportunity with a dynamic company working on cutting
edge technology....
Product Safety Engineer:
Responsible for all aspects of product safety compliance of BBT products as
relates to UL and Bellcore requirements documents. This includes design
guidelines, preliminary testing and submittals for listings with Nationally
Recognized Testing Laboratories. Will work with electrical and mechanical
design engineers to ensure compliance is designed into the products,
manufacturing and quality engineers to ensure continued product compliance.
Requires a BSEE or equivalent work experience and in depth knowledge of: UL
Standards UL-1459 Telephone Equipment, UL-1950 Information Technology
Equipment, IEC-950 International Standard.
Direct Work Experience of 2 to 3 years.
Some Travel will be required.
Duration: Permanent Position
Jobsite Location: Durham NC
Start Date: ASAP
For the Above Position, please respond by email or fax to
Internet: j...@bbt.com
Fax: 919-544-3459
----- End Included Message -----
----- Begin Included Message -----
>From dave_hi...@qmail.newbridge.com Wed Jan 3 13:29:03 1996
List-Post: emc-pstc@listserv.ieee.org
Date: 3 Jan 1996 18:06:01 -0500
From: "Dave Hills" <dave_hi...@qmail.newbridge.com>
Subject: Job Opening
To: "ICMA" <i...@telematics.com>, "T-Reg" <t...@sdd.hp.com>
X-Mailer: Mail*Link SMTP-QM 3.0.2
Content-Length: 434
Newbridge Networks Limited has an opening for an Approvals Engineer based in
Maidenhead, UK.
Applicants should have experience of Telecom Approvals and knowledge of
Safety, EMC or Network requirements in at least part of one of the following
regions Europe, Middle East or Africa.
For further information please contact me, Dave Hills on
Tel 01628 682964 (Int +44 1628 682964)
Fax 01628 777361
E-Mail dhi...@newbridge.com
----- End Included Message -----
----- Begin Included Message -----
>From mfran...@gol.com Sat Dec 30 15:41:08 1995
List-Post: emc-pstc@listserv.ieee.org
Date: Sun, 31 Dec 1995 05:39:02 +0900 (JST)
X-Sender: mfran...@popmail.gol.com (Unverified)
X-Mailer: Windows Eudora Version 1.4.4
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
To: t...@sdd.hp.com
From: mfran...@gol.com (Mark J. Francis)
Subject: Job Opening
Content-Length: 306
Dear T-Reggers,
We have openings for compliance engineers to staff our new office in the
Silicon Valley. Familiarity with the requirements in East Asia,
particularly Japan, a big plus. Please email your resume to Mark Francis at
mfran...@gol.com or fax it to (310) 598-4738.
Mark Francis
Incom Ltd.
----- End Included Message -----
----- Begin Included Message -----
>From er...@smtplink.pulse.com Thu Apr 18 16:53:11 1996
List-Post: emc-pstc@listserv.ieee.org
Date: Thu, 18 Apr 96 16:48:25 EST
From: "Eric Petitpierre" <er...@smtplink.pulse.com>
Encoding: 9 Text
To: jo...@ces.teradyne.com
Subject: Job Posting
Content-Length: 282
John,
I have no idea on the status of the job posting I had placed on the
user group. I was only the messenger.. For more information, please
call the contact in the body of the original message.
Eric Petitpierre
er...@pulse.com
XXXXXXXXXXXXXXXXX POSITION ?????? XXXXXXXXXXXXXXXXXXXXXXXXX
>From owner-emc-p...@mail.ieee.org Fri Dec 15 16:43:24 1995
List-Post: emc-pstc@listserv.ieee.org
Date: Fri, 15 Dec 95 14:23:33 EST
From: "Eric Petitpierre" <er...@smtplink.pulse.com>
Encoding: 15 Text
To: emc-p...@ieee.org
Subject: Job opening
Content-Length: 415
An established LAN/WAN manufacturer in the SanFrancisco Bay area seeks a
principal level engineer for work in EMC design worldwide. The candidate
will be a team oriented professional with 10-15 years of direct experience.
A Masters degree and professional publications/patents are a plus.
Indicate your interest by corresponding via. FAX, to:
Principal EMC Engineer (415) 780-5004
Please contact Ty Stork
tel (805)-650-8888
fax (805)-650-8976
or email at the following:
em...@survivalsystems.com
----- End Included Message -----
Tue Dec 19 14:11:08 1995
From: tem...@aol.com (Bill Jacowleff)
----- Begin Included Message -----
>From tem...@aol.com Tue Dec 19 14:11:08 1995
From: tem...@aol.com
List-Post: emc-pstc@listserv.ieee.org
Date: Tue, 19 Dec 1995 14:09:17 -0500
To: jo...@ces.teradyne.com
Subject: Compliance Manager and Engineer Positions
Content-Length: 1332
Greetings:
I am currently recruiting for two positions in Compliance Engineering with
the titles of Manager and Engineer , see short description below. If you or
someone you know are interested in these positions please contact me.
Compliance Manager/Engineer
As a member of the Engineering Staff you will schedule, oversee, and
trouble-shoot the regulatory tests of domestic and international products.
You will also file application for approval with appropriate regulatory
agencies and maintain complete records of compliance.
5 years experience minimum, BSEE, BSCE degree
Experience with FCC part 68, part 15, DOC UL/CSA required
Experience with European PTT compliance highly desired
Project management experience
Ability to understand circuits and design considerations required.
Bill Jacowleff
HR Recruiter
Temtek Inc.
266 Broad Street
Milford, CT 06460
Email: tem...@aol.com, Please no resumes via Email
Voice: 203-877-8634
FAX: 203 877 6394 or 203 878-4271
Temtek Inc, specialists in retained and contingency search was founded in
1985. Temtek is a nationally recognized force in the placement of High Tech
thru upper management personnel. Our fees are paid by our client companies.
With a network of affiliate offices across the U.S. we are actively
recruiting in all regions.
----- End Included Message -----
----- Begin Included Message -----
>From owner-emc-p...@mail.ieee.org Fri Dec 15 22:21:06 1995
List-Post: emc-pstc@listserv.ieee.org
Date: 15 Dec 1995 17:12:52 -0800
From: "Rob Newell" <rob_newell...@mailserver2.clix.com>
Subject: Job Opportunity...
To: "emc-pstc group" <emc-p...@ieee.org>
Cc: "Leo Barnes" <leo_barnes.h...@mailserver2.clix.com>
X-Mailer: Mail*Link SMTP-QM 3.0.2
Sender: owner-emc-p...@mail.ieee.org
Reply-To: "Rob Newell" <rob_newell...@mailserver2.clix.com>
X-Resent-To: Multiple Recipients <emc-p...@mail.ieee.org>
X-Listname: emc-pstc
X-List-Description: Product Safety Tech. Committee, EMC Society
X-Info: Help requests to emc-pstc-requ...@mail.ieee.org
X-Info: [Un]Subscribe requests to majord...@mail.ieee.org
X-Moderator-Address: emc-pstc-appro...@mail.ieee.org
Content-Length: 1125
< Date: 12/15/95
Subject: Job Opportunity... Time: 4:54 PM
Compression Labs, Inc., (CLI), a leader in the rapidly expanding digital video
communication markets, has an opening for a Compliance Engineer.
Brief Job Description:
Responsible for worldwide compliance needs of group videoconferencing systems
for electromagnetic compatibility and product safety requirements. Assist in
product design from board-level to final system to meet emissions and immunity
requirements of the global marketplace. Must have BS or Equivalent in
electronic engineering plus 3 to 8 yrs in EMC design and control. Experience
with the EMC Directive and ITE also required.
CLI offers a comprehensive salary and benfits package including a 6-week paid
sabbatical.
Please e-mail your resume, indicating opportunity #LB-1275 to job...@clix.com.
Also check out our Web site at http://www.clix.com
CLI is proud to be an Equal Opportunity/Affirmative Action Employer.
Robert E Newell (rob_new...@clix.com)
Compression Labs, Inc.,
San Jose, CA 95134
----- End Included Message -----
----- End Included Message -----
----- End Included Message -----
