Note 1 of section 5.3.2 is in the 3rd edition of UL1950, July 28, 1995. Tania Grant, Octel Communications Corporation
______________________________ Reply Separator _________________________________ Subject: Re: Routine Hipot testing Author: "janos vajda" <jva...@modicon.com> at P_Internet_mail List-Post: emc-pstc@listserv.ieee.org Date: 5/6/96 1:45 PM Dear Mr. Varju; Could you please tell me which version of UL1950 did you refer to. In a 1989 edition section 5.3.2 has no Note 1. Section 1.4.2 states that all tests -unless otherwise stated, are type tests. Section 5.3.2 does not state otherwise. Regards: janos vajda Reply-to: "Egon H. Varju" <73132.2...@compuserve.com> Kaz, On 1996.5.5 you wrote: >I believe that the harmonized, 3rd edition of UL 1950/ CSA C22.2 N0. 950 >has pulled the requirement for 100 % hi-pot testing out of the standard. >Not to say that this is no longer a requirement. A comment from a UL >rep. was that such factory testing is included in the Certification >reports (or Follow Up Service Agreements) as a requirement and so the >text has been removed from the bi-national standard. Nevertheless, it >must still be performed. Actually, the requirement has not been removed from the bi-national standard. See Sub-Clause 5.3.2, Note 1. :-) Egon Varju