You must register on http://astimage.daps.dla.mil/online/
to get the access to MIL-STDs Mirko > -----Original Message----- > From: Matejic, Mirko > Sent: Tuesday, December 14, 1999 10:22 > To: 'Jose Miguel Rio'; emc-p...@majordomo.ieee.org > Subject: RE: copper properties & MIL-STD 461 & 462 > > > MIL-STD-461E REQUIREMENTS FOR THE CONTROL OF > ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS > OF SUBSYSTEMS AND EQUIPMENT issued on August 20, > 1999, 253 pages is available in Acrobat Reader format, 970 KB on: > > http://assist.daps.mil/eAccess/index.cfm?ident_number=35789 > > Mirko > > > -----Original Message----- > > From: Price, Ed [SMTP:ed.pr...@cubic.com] > > Sent: Tuesday, December 14, 1999 9:43 > > To: 'Jose Miguel Rio'; emc-p...@majordomo.ieee.org > > Subject: RE: copper properties & MIL-STD 461 & 462 > > > > > > Jose: > > > > The best source of information about MIL-STD-461 is the standard itself. > > All > > of the requirements are defined very thoroughly (well, maybe not so > > thorough > > for Methods CS103, CS104 & CS105) within the document, and an Appendix A > > is > > provided which gives you a discussion of the purposes, problems and > > rationale behind each of the Test Methods. > > > > Remember that the "D" revision has now been superseded by the "E" > version. > > What used to be MIL-STD-461D and the separate MIL-STD-462D have now been > > combined into a single document, which is MIL-STD-461E. New equipment > > should > > be qualified to the "E" version, but existing equipment may still be > > tested > > under the version in effect at the time of the original qualification. > So, > > don't throw away your "B", "C" or "D" versions. > > > > Ed > > > > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to majord...@ieee.org > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to ed.pr...@cubic.com, > jim_bac...@monarch.com, ri...@sdd.hp.com, or > roger.volgst...@compaq.com (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
