Posted for john.linst...@cdynamics.com
:-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-) Ed Price ed.pr...@cubic.com Electromagnetic Compatibility Lab Cubic Defense Systems San Diego, CA. USA 619-505-2780 (Voice) 619-505-1502 (Fax) Military & Avionics EMC Services Is Our Specialty Shake-Bake-Shock - Metrology - Reliability Analysis :-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-):-) > -----Original Message----- > From: Linstrom, John (IndSys, GEFanuc, CDI) > [SMTP:john.linst...@gefgreenville.ge.com] > Sent: Wednesday, September 01, 1999 7:20 AM > To: 'James, Chris' > Cc: 'emc-p...@ieee.org' > Subject: RE: "hard anodized" process to insulate metal chassis parts > > Maybe a slip of the fingers... We recently got bit on the fishpaper > insulation. Fishpaper absorbs moisture; better to call it plastic, or > mylar, etc. than to leave a possible suggestion that fishpaper is any good > for this application. > > John Linstrom > Computer Dynamics > PH 864.281.7768 x266 > FX 864.675.0106 > john.linst...@cdynamics.com > > > -----Original Message----- > From: James, Chris [ <mailto:c...@dolby.co.uk>] > Sent: Wednesday, September 01, 1999 3:16 AM > To: > Subject: RE: "hard anodized" process to insulate metal chassis parts > > > > Given that sulphuric hard III anodizing is only .001 to .003" thick then > I'd > have thought not. It is also fairly easy to compromise, so in a mechanical > > assembly you would be hard pressed to know how good the insulator was or > how > long it would remain so after the rigours of use (vibration etc.). Better > to > stick with SIL pad type materials or non-hydroscopic "Fish card" type > insulators. > > Chris James > > -----Original Message----- > From: Paul J Smith [ <mailto:paul_j_sm...@notes.teradyne.com>] > Sent: Tuesday, August 31, 1999 6:20 PM > To: emc-p...@ieee.org > Subject: "hard anodized" process to insulate metal chassis parts > > > > Good afternoon, > > Does anyone know of a process of "Hard Anodized" metal chassis parts that > > is > considered an acceptable insulator against hazardous voltages by any > agency. > The > related spec describing this process is MIL- A-8625F. > > Please advise at your earliest convenience. Thanks > > > Best Regards, > Paul J Smith > Teradyne, Inc., Boston > paul.j.sm...@teradyne.com > Voice 617-422-2997 > FAX 603-843-7526 > > > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to majord...@ieee.org > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to ed.pr...@cubic.com, > jim_bac...@monarch.com, ri...@sdd.hp.com, or > roger.volgst...@compaq.com (the list administrators). > > > --------- > This message is coming from the emc-pstc discussion list. > To cancel your subscription, send mail to majord...@ieee.org > with the single line: "unsubscribe emc-pstc" (without the > quotes). For help, send mail to ed.pr...@cubic.com, > jim_bac...@monarch.com, ri...@sdd.hp.com, or > roger.volgst...@compaq.com (the list administrators). > --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to ed.pr...@cubic.com, jim_bac...@monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
