Paul: Tektronix has a good application note covering measurement of adjacent channel power. I am not sure but I don't think the 8566B can be triggered to perform such measurements, I've been away from the field a little too long . Tek markets the Rhode and Schwartz products and most modern spectrum analyzers have that capability. A call to the local office should get you some help.
Ralph Cameron EMC Consultant forSuppression of Consumer Electronics (After sale) ----- Original Message ----- From: "Paul Slavens" <paul_slav...@hotmail.com> To: <emc-p...@ieee.org> Sent: Wednesday, June 28, 2000 5:28 PM Subject: Adjacent Channel Power Measuring Equipment > > Hello Group, > > I am having a little trouble with section 8.5 (adjacent channel power) of > ETSI EN 300 220-1. Specifically, I am having difficulty understanding the > requirements for the power-measuring receiver defined in Annex B. My > questions are: > > 1. Is the HP EMI rack, consisting of an 8566B spectrum analyzer, an 85685A > RF pre-selector, and an 85650A quasi-peak adapter a suitable instrument for > making adjacent channel power measurements? > > 2. If the HP EMI rack will not properly measure adjacent channel power per > ETSI EN 300 220-1, what instrument or instruments will? > > If anyone could help shed a little light on the above question, I would be > most thankful. > > Regards, > > Paul Slavens > > ________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: jim_bac...@mail.monarch.com > Michael Garretson: pstc_ad...@garretson.org > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org