Legally the regulations refer to appliances intended for domestic use. See http://www.hmso.gov.uk/si/si1994/Uksi_19941768_en_1.htm Section 11(1)(d).
It is not uncommon for any equipment intended for connection to a domestic power supply to have a plug fitted even if it is for professional use. Best regards Glenn Moffat TUV International UK Tel: +44 121 634 8000 Fax: +44 121 634 8080 I read in !emc-pstc that Nick Williams <nick.willi...@conformance.co.uk> wrote (in <v04220800b7e065df1d3d@[192.168.1.6]>) about 'Power Plugs', on Wed, 3 Oct 2001: >If you mean the end user, >then if you can make a watertight case that the product is only for >professional use you are legally allowed to do this although in >practice it will be frowned upon. If you have any evidence of this, please tell me, because the DTI have given assurances that it ('frowning') is not the case: professional products don't need plugs. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Eat mink and be dreary! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.