Dear colleagues, I need to know your opinion on the following : I have to perform EMC testing on an induction cooking table and I would like to obtain the FCC certification.
In Europe, this kind of apparatus is subjected to the EN55011 (CISPR11) and the test conditions are clearly stated, mainly for the EUT configuration. I understand for the USA, the product has to be tested according to Part 18 requirements. This part explains that the technical requirements for the measurement are described in the MP-5 document. As this one is a little bit old (1986), do you believe I can use the CISPR11 to demonstrate compliance, or should I use the MP5 ? If I have to use the MP-5, do you know if somewhere the EUT configuration is described, or is the "worst case" at the manufacturer discretion ? And, at last, do you know if I have to submit my test results and EUT description to FCC directly (electronic submittal), or should I have to go to a TCB ? In advance, I thank you a lot for your answers, Best regards from France ==================================== Pierre SELVA 2 route de la Grobelle 73000 JACOB BELLECOMBETTE - France Tel : 33 (0)6 60 52 04 96 Fax : 33 (0)6 61 37 87 48 e-mail : pierre.se...@worldonline.fr pierrese...@onetelnet.fr ====================================