If you don't use a source of similar size to the EUT you won't get the right answer.
---------- >From: "Tudor, Allen" <allen_tu...@adc.com> >To: "EMC-PCST (E-mail)" <emc-p...@majordomo.ieee.org> >Subject: Site Correlation >Date: Thu, Jan 11, 2001, 7:58 AM > > > Greetings: > > What's the best way to correlate a pre-compliance chamber (smaller than a 3m > chamber) to a 10m anechoic chamber? Should I use a signal generator and > antenna or should I use a comb generator? > > Would the answer be different if I were correlating the pre-compliance > chamber to an OATS? > > Thanks in advance. > > > Allen Tudor, Compliance Engineer > ADC DSL Systems Inc. > 6531 Meridien Dr. > Raleigh, NC 27616 > phone: 919.875.3382 > email: allen_tu...@adc.com > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: jim_bac...@mail.monarch.com > Michael Garretson: pstc_ad...@garretson.org > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org