Is there a route for "special temporary authorization" or "experimental license" for a specific customer location? This may be on a spectrum authority (SA) by SA basis. "Just do it!" may be a fine logo for selling shoes, but does not work in legal arenas.
Don Umbdenstock Sensormatic Electronics Tyco International > ---------- > From: Tania Grant[SMTP:taniagr...@msn.com] > Reply To: Tania Grant > Sent: Monday, December 17, 2001 1:33 PM > To: am...@westin-emission.no; emc-p...@majordomo.ieee.org > Subject: Re: Non-compliant product put into EU marked > > > Is the manufacturer serious, or completely ignorant? > > If serious, I would disassociate from them as much as possible. If merely > ignorant, and you have some sort of association with them, I would > recommend > that you educate them fully. > > Another thought, -- is this product slated for mass distribution, even for > only a month, or is it going to another location or a particular customer > for some special in-house use or application? What does this customer > think? Are they aware, and do they agree to this? The Directives do > have > special provisions for certain special applications where non-compliant > (or > is it merely "untested" !) product can be shipped to Europe, but I > believe > that under those circumstances, the name of the manufacturer and product > model name or designation has to be "published" broadly in the EU. I > don't > remember the details. If anyone can shed more light, that would be very > nice. > > taniagr...@msn.com > > ----- Original Message ----- > From: <am...@westin-emission.no> > To: <emc-p...@majordomo.ieee.org> > Sent: Sunday, December 16, 2001 2:06 PM > Subject: Non-compliant product put into EU marked > > > > > > Hi all, > > > > You place a radio product into the EU marked with the following status: > > > > - Not been EMC, radio or safety tested (the previous model was tested > and > > compliant, major modifications have later been implemented) > > - The product will only be in the marked for a time limiting period ( 1 > > month) > > - During the time limiting period it will be operating as in a normal > > condition > > - No CE mark on the product and no DoC > > > > I mean that you can't do this. You have to confirm that you fulfil the > EMC, > > radio and safety requirements, DoC in place, even that the product just > will > > be in the marked for 1 month and thereafter withdrawal. > > > > Any other comments from the list members ? > > > > Best regards > > Amund Westin, Oslo/Norway > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > majord...@ieee.org > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Michael Garretson: pstc_ad...@garretson.org > > Dave Heald davehe...@mediaone.net > > > > For policy questions, send mail to: > > Richard Nute: ri...@ieee.org > > Jim Bacher: j.bac...@ieee.org > > > > All emc-pstc postings are archived and searchable on the web at: > > No longer online until our new server is brought online and the old > messages are imported into the new server. > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: pstc_ad...@garretson.org > Dave Heald davehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
