Hello, We use an agilent E4419B +/- 0.02dB log or 0.5% linear with an E4412A Mount with an uncertainty of 1.3%.
See http://cp.literature.agilent.com/litweb/pdf/5965-6382E.pdf for uncertainty. Regards, Ken Hall -----Original Message----- From: khar...@lexmark.com [mailto:khar...@lexmark.com] Sent: Friday, June 14, 2002 1:32 PM To: emc-p...@majordomo.ieee.org Subject: Measurement Uncertainty Dear All: I am looking for the most accurate measuring device to determine the amplitude of a RF sine wave with the lowest possible uncertainty . For now lets assume I am trying to measure a 80dBuV sine wave between 30MHz to 1GHz from a 50 ohm source and other signal componets not at the intended frequency is at least 80dB down. The standard choices are spectrum analyzer with ~2dB uncertainty, receiver with ~1dB uncertainty or watt meter with ~0.5dB uncertainty. All uncertainty's are assumed to be with an expanded uncertainty of K=2. Does anyone know of a method or device that can do better than the watt meter? Let's limit the discussion to a device that costs <$20K. Thanks, Keith Hardin Lexmark International Inc. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"