I agree with Scott completely. I am a comliance engineering consultant and am always on the lookout for good deals on surplus equipment for both my clients and myself. Those who disagree can always click delete. Remember, this is an open forum and equipment is appropriate. Bill
----- Original Message ----- From: "Scott Lacey" <sco...@world.std.com> To: "Michael Taylor" <mtay...@hach.com> Cc: <emc-p...@majordomo.ieee.org> Sent: Friday, May 17, 2002 6:15 PM Subject: Re: Surplus EMC Test Equipment available > > Michael, > I fail to see why anyone should be wrathful about a onetime offering of equipment > directly related to the work performed by list members. Not all of us work for > corporations with deep pockets (and some of THOSE aren't so deep lately) so used > equipment is often the only choice available. I view the listing of surplus emc/safety > test equipment the same as listing of available emc positions - it is a service to list > members. > > On another subject, and not referring to any particular posting, the tone of some > responses have been a little bit "edgey" lately. I urge all listmembers to consider that > a posting that annoys them today may be from someone who has provided help in > the past. Let's please all extend professional courtesy to our colleagues and try to > avoid divisiveness, or else change the rules to encourage "flaming" so that we can > form alliances and get to (grin) "vote someone off the island". > > Wishing all a relaxing and restful weekend, > Scott Lacey > > On 15 May 2002 at 16:59, Michael Taylor wrote: > > > > > Greetings all. Risking the wrath of some list members, I am posting a list of surplus EMC test > > equipment. I hope no one takes this as a business offering, which it is not. > > I would prefer these items to go to a working lab instead of just being sold off to a broker. > > The recent assimilation of another company into the Danaher Corp. Collective has resulted in > > several EMC Test equipment items declared surplus. > > These items are all in like new condition and guaranteed working to spec. > > If anyone has any interest in these items please contact me off-line. > > No reasonable offer refused. > > Below is a list of items. (with the understanding the list is preliminary and may change subject to > > upper management decisions over which I have no control) > > Items 1 & 2 are available now. Items 3-14 will not be available for 30-35 days. (I was directed to > > list them now) > > Thank you for your understanding in this listing. > > Michael Taylor > > Colorado > > mtay...@hach.com > > 970-663-1377 ext 2646 > > ------------------------------------------------ > > <<<< items available now >>>>> > > 1. Lindgren shield room (2 years old) 16' L x 12' W x 10' H w/ 4' door (unlined), 2x 30A filters & > > two 12" wave guide air vents. > > Buyer responsible for disassembly & removal prior to 7/30/02. Located in Wisconsin. > > 2. TEM Cell, Voltek "G-STRIP" 4'x4'x4' in good condition. > > <<<< the following are scheduled for surplus in the next 30 days.>>>> > > 3. Schaffner NSG 1025 EFT/Surge Generator w/ 2 CDN's > > 4. Schaffner CDN-125 EFT Coupling Clamp > > 5. EMCO 20A LISN > > 6. SOLAR 24A LISN > > 7. Chase MA2050B LISN > > 8. KeyTek Mini-Zap ESD gun (complete kit) > > 9. Advantest 3 Ghz Spectrum analyzer > > 10. HP L1500 / 4401A 1.5 Ghz Spectrum Analyzer > > 11. HP 70000 series System Spectrum Analyzer (a great system EMC Analyzer for an automated > > test system) > > w/ 70206A Graphics Display unit > > 70001A Mainframe > > 70300A Tracking Gen. > > 70621A Preamp (10Hz-3 Ghz) > > 70904A RF Section > > 70400A Local Osc. > > 70902A IF (10Hz-300Khz) > > 70903A IF (100Khz-3Mhz) > > 12. HP 8648A Signal Gen. (9K-1Ghz) > > 13. Marconi Signal Gen. 2022E (9K-1Ghz) > > 14. Elgar, SW-5250 Programmable AC Power Source, 40Hz-400Hz 3phase @1750VA/phase > > (can be ganged for 18A -1 phase @ 366V) for harmonics, flicker, & Power Qual. > > 15 Fischer Communications, model BCICF-1, Injection Clamp Calibration Fixture. > > end of list > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@attbi.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
