We also use the 34970A for data acquisition with HP BenchLink for our safety testing and are very pleased with it's performance and ease of use. We also have a Hydra II system which mostly gathers dust now. The 34970 / BenchLink system is so much easier to setup & use. Also the data log is a snap to link into a Word report. For what it's worth. Michael Taylor Colorado
-----Original Message----- From: duncan.ho...@snellwilcox.com [mailto:duncan.ho...@snellwilcox.com] Sent: Tuesday, May 07, 2002 2:46 AM To: EMC-PSTC Discussion Group; richwo...@tycoint.com Subject: Re[2]: Thermal Testing Richard, We use an Agilent 34970A data aquisition unit with three 34901A 20 channel mux modules fitted. This is not a PC card but a rack and stack instrument about the size of a bench DVM that connects to the PC via a serial cable. It also comes with the software. Very similar to the fluke hydra II. This has proven to be an excellent instrument and well worth the investment. Most other equipment of the same price could only offer around 10 channels of measurement whereas this allows up to 60. It is also modular so you only need buy as many 20 channel mux modules as you need. Regards, Duncan ____________________Reply Separator____________________ Subject: Re: Thermal Testing Author: Doug <mailto:dmck...@corp.auspex.com> McKean List-Post: emc-pstc@listserv.ieee.org Date: 5/6/2002 22:11 richwo...@tycoint.com <mailto:richwo...@tycoint.com> wrote: > > Do any of you monitor and record component temperatures during safety > testing using PCs and data capture I/O cards? If so, what hardware and > software to you use? I do any monitoring any temp testing with a Fluke Hydra II and associated PC software. Set up and define probes, start software, dump into an Excel spreadsheet or report. Communication between the Fluke and the PC is done through serial ports. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"