Hi Alex,

A few comments on your summaries:

>My "summarized" Safety Requirements
>IEC 60950-1:2001 CB route (change to AS/NZS 60950)
>TS001 (Aus and NZ?)
>UL and or CSA application only, via the NRTL route using the CB report.
>NOM019

This seems to be in order, but you will find some difficulty in getting 
country-specific safety
approvals based on IEC60950-1 at this time. For instance, the AS/NZS and UL 
versions have not been
officially published yet. Also, please note that NOM-019 is a bit of a 
conglomeration and refers to
standards IEC65:1985, IEC60950 2nd Ed. including A4, and UL478 4th Ed. 
according to clause 27.

>My "summarized" EMC Requirements
>EN55022 (use ANSI procedures for 120V and 230V, self declare CE, AS/NZS
>accept?)
>EN55024
>EN61000-3-2 and -3 (No test, small power product, no SMPS, wouldn't fail,
>just self declare)

The ACA in Australia has stated that it now recognizes CISPR22 reports if, and 
only if, the test was
performed at 240V and at a NATA approved test lab.

>My "summarized" Analogue Modem Requirements
>TBR21 + EG 201 121 (Europe)
>FCC Pt 68 (Mexico and Canada acceptance?)
>TS002 (Australasia, no PTC 200?)

For Canada, formal approval to Industry Canada's CS-03 is required. However, be 
advised of recently
revised rules that will likely affect your product. Mexico also has their own 
formal, and a bit
peculiar, telecom requirements. You will want to consult your importer for 
details.

IHTH. Comments anyone?

Best regards,

Ron Pickard
rpick...@hypercom.com



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to