OK, I have to ask. Wouldn't it be acceptable to state 120V and with the +- 10% you would have an implied range of 108-132V?
Rick Busche rbus...@es.com -----Original Message----- From: geor...@lexmark.com [mailto:geor...@lexmark.com] Sent: Friday, January 04, 2002 2:42 PM To: cecil.gitt...@kodak.com Cc: emc-p...@majordomo.ieee.org Subject: North America Voltage Ratings Cecil, This site http://www.panelcomponents.com/guide.htm lists U.S. and Canada as 120V and Mexico as 127V. We normally rate our printers as 110-127V, if not going to Japan. However, I have seen single value ratings of 115V and 120V on models going to these countries without issues brought to my attention. My suggestion is 110-127V. George cecil.gittens%kodak....@interlock.lexmark.com on 01/04/2002 04:04:37 PM Please respond to cecil.gittens%kodak....@interlock.lexmark.com To: emc-pstc%majordomo.ieee....@interlock.lexmark.com cc: (bcc: George Alspaugh/Lex/Lexmark) Subject: From: Cecil A. Gittens Hi All, What is the correct voltage labeling for the US, Canada and Mexico on product dataplate? Is it 100-120V or 100-127V? ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.