Cecil,
This site http://www.panelcomponents.com/guide.htm lists U.S. and
Canada as 120V and Mexico as 127V.
We normally rate our printers as 110-127V, if not going to Japan.
However, I have seen single value ratings of 115V and 120V on models
going to these countries without issues brought to my attention.
My suggestion is 110-127V.
George
cecil.gittens%kodak....@interlock.lexmark.com on 01/04/2002 04:04:37 PM
Please respond to cecil.gittens%kodak....@interlock.lexmark.com
To: emc-pstc%majordomo.ieee....@interlock.lexmark.com
cc: (bcc: George Alspaugh/Lex/Lexmark)
Subject:
From: Cecil A. Gittens
Hi All,
What is the correct voltage labeling for the US, Canada and Mexico on
product dataplate?
Is it 100-120V or 100-127V?
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: pstc_ad...@garretson.org
Dave Heald davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.