Hello All: I am hoping that some of you can help clarify the intent of requirement R9-20 in Telcordia GR-1089. Taken literally, the requirement says that there shall be no damage to equipment, conductors, or components when the DC power supply is shorted at the load. This could even be interpreted to preclude the use of a fuse that has to be replaced.
One test lab has told me that as long as no fire hazard is created from this test, it is considered to have been passed. Needless to say, this differs a bit from the literal interpretation. I guess it would help if I had a better feel for the overall goal of the short circuit testing. Any insight on this would be most appreciated. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 http://www.randolph-telecom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"