Regarding my query on medical equipment transformer construction (EN-60601-1, clause 57.9.4(e)), can I be a bit more specific.
- How were insulation thickness requirements decided, and why is the thickness requirement lower if insulation is 2-layer rather than single-layer ?. - Why are single-layer and 2-layer insulation requirements defined in terms of thickness, yet 3-layer insulaton requirements defined in terms of dielectric strength ?. Thanks Ged Dean ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. NCHT ********************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"