Yes. Best regards, Kevin Richardson
Stanimore Pty Limited Compliance Advice & Solutions for Technology (including Australian Agent Services) (Legislation/Regulations/Standards) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@ieee.org The material transmitted in this message and contained in any attachments to this message is confidential and/or privileged information and is intended only for the addressee/s. Any unauthorised use of or reliance upon this material by persons or entities other than the addressee/s is prohibited. If you receive this information in error, please notify the sender and destroy any copies of the material immediately. -----Original Message----- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of richwo...@tycoint.com Sent: Tuesday, 16 July 2002 9:43 PM To: emc-p...@majordomo.ieee.org Subject: RE: EN60950 3rd vs EN60950-1 OK, let me ask the question again. Is EN60950-1 complete enought to evaluate most ITE without the need of the subparts? Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Brian McAuliffe [mailto:i...@mcac.ie] Sent: Tuesday, July 16, 2002 2:35 AM To: Ron Pickard; richwo...@tycoint.com Cc: emc-p...@majordomo.ieee.org Subject: RE: EN60950 3rd vs EN60950-1 I would agree, kind of like IEC/EN 60335 for domestic electrical and similar equipment. Brian McAuliffe MCA Compliance Solutions www.mcac.ie -----Original Message----- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Ron Pickard Sent: 15 July 2002 21:28 To: richwo...@tycoint.com Cc: emc-p...@majordomo.ieee.org Subject: RE: EN60950 3rd vs EN60950-1 Richard et al, It is my understanding that IEC/EN/?? 60950-1 is intended to supercede IEC/EN/?? 60950 3rd Edition. This is evidenced by the statement from CENELEC's web site relating to EN60950-1, which is "Supersedes EN 60950:2000". The IEC's website provides this statement "This first edition of IEC 60950-1 cancels and replaces the third edition of IEC 60950, issued in 1999, and constitutes a technical revision". For specific requirements for particular product variants, other sub-parts (EN60950-xx) would be necessary. BTW, EN60950-21 (remote power feeding) is the only sub-part on record with CENELEC according to their website. In addition to Part 21, the IEC's website also describes "Part 22: Equipment installed outdoors" and "Part 23: Large IT equipment with integral robotics". So, I believe that if products do not apply to any sub-part, then I would presume that sub-part 1 would be the only sub-part that would apply. Comments? Best regards, Ron Pickard rpick...@hypercom.com richwo...@tycoint.com Sent by: To: emc-p...@majordomo.ieee.org owner-emc-pstc@majordo cc: mo.ieee.org Subject: RE: EN60950 3rd vs EN60950-1 07/15/02 11:45 AM Please respond to richwoods A couple of months ago, I asked the group if I should be using EN60650-1. The answer was "no", until and unless the particular part was published that covered my product. In other words, the new edition is incomplete and subsequent parts will need to be published before it can be used instead of the current edition. Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Brian O'Connell [mailto:boconn...@t-yuden.com] Sent: Monday, July 15, 2002 9:25 AM To: emc-p...@majordomo.ieee.org Subject: RE: EN60950 3rd vs EN60950-1 In my copy of EN 60950-1:2002, purchased from BSI, the DoP is listed as December 01, 2002. R/S, Brian O'Connell Taiyo Yuden (USA), Inc. -----Original Message----- From: Ron Pickard [mailto:rpick...@hypercom.com] Sent: Friday, July 12, 2002 3:10 PM To: emc-p...@majordomo.ieee.org Subject: Re: EN60950 3rd vs EN60950-1 Hi Allen, Thanks for your reply, however, I highly doubt that these products will be obsoleted by then, which is the source of my concern and my query. Also, at some standards purchasing houses, I've noticed that EN60950 3rd Edition has been, or is being, superceded by EN60950-1. This has caused me to ask the question of OJ publication. Best regards, Ron Pickard rpick...@hypercom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
