RE, our recent discussions on unit prefixes: I ran across a standard in my stash, IEC60027-1, Letter Symbols to be Used in Electrical Technology is another reference for this topic. The base standard is dated 1992, with Amendment 1 dated 1997. The IEC web site identifies four dash standards, the others being:
Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics Letter symbols to be used in electrical technology. Part 3: Logarithmic quantities and units Letter symbols to be used in electrical technology. Part 4: Symbols for quantities to be used for rotating electrical machines Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA peter.tar...@sanmina-sci.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
