Hi Group,
What is your opinion about the electrical safety aspects of bootlace ferrules, especially the twin versions. Several standards allow the insertion of 2 wires in a terminal "if especially designed for". What about 2 wires in a twin bootlace ferrule? How shall I look at such a device ? - as an extension to the terminal making it "especially designed for" - as a device to joint two wires into one ? What to consider here ? What about safety standards for this product ? I found no approval markings on data sheets ? Best Regards Gert Gremmen This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
