Rob. Required is an interesting term, and this is a long debate involving OSHA, National Electrical Code, fire codes and when and if anybody inspects the equipment before its installed. There are places that you probably would be alright, some that you wouldn't probably be caught even if it wasn't right, and then there are places like the City of LA that seems to have a pretty rigorous inspection policy. They by the way can give you a City of LA inspection, but it isn't of any real value outside of LA. Then there are customers that use the safety marks in an attempt to reduce their liability by showing they have done what any reasonable manufacturer would do to protect customers. So short pragmatic answer, in my opinion, yes you need it. Gary The debate rages on
-----Original Message----- From: rob.humph...@reuters.com [mailto:rob.humph...@reuters.com] Sent: Thursday, September 19, 2002 7:46 AM To: emc-p...@majordomo.ieee.org Subject: safety testing in the USA Group, I am in discussions with a potential supplier of IT equipment, Its our usual policy to request testing to a listed standard such as UL 60950 for safety in North America. The supplier has replied that this is not mandatory. Is he correct? what compels safety testing for IT equipment in this geography? is it mandated by law? Thanks in advance for your opinions Rob ------------------------------------------------------------- --- Visit our Internet site at http://www.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"