I need to make a decision on an amplifier for radiated immunity testing in the 1-2 GHz range. The choices appear to be a new solid state amplifier ( I have not located a used one) or a used TWT amp. Is anyone using a TWT amplifier for radiated immunity testing above 1 GHz? Do I need to be concerned about protecting the tube from damage caused by excessive VSWR cause by, perhaps, chamber effects? Is there anything else I need to know about TWT amps (yeah, I know - throw it way if the tube dies)?
Richard Woods Sensormatic Electronics Tyco International ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"