Probably won't get many responses this week as everyone with a travel budget is now in Minnesota. However, I'll try it anyway.
In the 1998 version of EN 55022, radiated emissions tests on table top products are performed with a ferrite tube or clamp on each cable that exits the test site (i.e. AC mains, telecom, I/O to remote control units). ANSI C63.4 does not specify this. If I follow the EN 55022 procedure, is it necessary to repeat without the ferrite clamps in order to satisfy the ANSI test procedure? Thanks. Jim Hulbert Pitney Bowes ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"