Hello Group, I am forwarding this question for a colleague who resides in Washington state, USA. Basically he would like to create, on a commercial basis, custom lighting (lamp fixtures), both portable (carry and plug in) , and permanent (built into a house). However, building inspectors etc want to see a safety mark for these creations. (UL or CSA or NRTL etc.) He is looking for advice about how a small business can economically and efficiently achieve safety certification for one-of-a-kind custom lighting fixtures. Thanks in advance George Stults
------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"