Martin,
with IEC, your National Committee will nominate you (if they agree that you 
should be there).
See the list of IEC members and their contacts from:

http://www.iec.ch/cgi-bin/procgi.pl/www/iecwww.p?wwwlang=e&wwwprog=membrs3.p

best regards,
Ari Honkala

> -----Original Message-----
> From: ext marti...@appliedbiosystems.com
> [mailto:marti...@appliedbiosystems.com]
> Sent: 28 March, 2002 02:12
> To: emc-p...@majordomo.ieee.org
> Subject: Committee Memberships
> 
> 
> 
> To all,
> 
> I am trying to find out what is required of an individual to become a
> member of committees that are responsible for creating 
> standards.  These
> committees would include, but not limited to, IEC Technical 
> Committees,
> Working Groups and ANSI Standards Committees.
> 
> My question is extremely general since I am trying to gather 
> any and all
> information on this process. I am sure that many  members of 
> this forum are
> involved in various committees that are responsible for 
> creating standards.
> Hopefully, you can shed some light on this issue.
> 
> All responses are greatly appreciated.
> 
> Regards
> 
> Joe Martin
> Compliance Engineering
> Applied Biosystems
> marti...@appliedbiosystems.com
> 
> 
> 
> 
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
> 
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
> 
> To cancel your subscription, send mail to:
>      majord...@ieee.org
> with the single line:
>      unsubscribe emc-pstc
> 
> For help, send mail to the list administrators:
>      Ron Pickard:              emc-p...@hypercom.com
>      Dave Heald:               davehe...@attbi.com
> 
> For policy questions, send mail to:
>      Richard Nute:           ri...@ieee.org
>      Jim Bacher:             j.bac...@ieee.org
> 
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"
> 

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to