Hello newsgroup readers, Question about the EMC test set-up for Emission + Immunity. We are developing a product which can be connected to the ethernet / LAN/ Internet. Do we need to connect the product to a PC (with ethernet card) in the anechoic room or can we decide to place the PC outside the anechoic room. Or can we test ONLY with an cable with NO termination.
What is your opinion Thanks in advance, Jan Mobers ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"