Group, Does anyone know what the Date of Withdrawal (DOW) is for EN 61010-1: 2001?
This new edition has been listed in the OJ at the web address below. However, there is no " Date of cessation" listed in the OJ. I have a copy of the standard, yet the Forward Section does not state a DOW. According to the OJ, Amendment A2 1995 to EN 61010 expired on April 1, 2001. Does this mean that if I am declaring conformity to EN 61010-1 1993, I can not declare conformity to A2 after April 1, 2001? However, A2 is included in the 2001 edition. This implies that we need to continue to conform to A2. Any clarification that can be provided would be helpful. Regards Joe Martin EMC/Product Safety Engineer Applied Biosystems marti...@appliedbiosystems.com http://europa.eu.int/eur-lex/en/dat/2002/c_057/c_05720020304en00010097.pdf ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"