Gary, If cost is not a big factor, try contacting Sunol in California. The contact I have is Dale Guthery at (925) 485-9260 (but I haven't talked to them in several years). I know a few years ago the were selling EMC test tables based on a design of ours which had wheels that could be easily removed once you rolled the table into place. I understood they were expensive but very nice tables.
Brian Kunde LECO ____________________Reply Separator____________________ Subject: Re: Non-metallic tables. Author: nick.willi...@conformance.co.uk List-Post: emc-pstc@listserv.ieee.org Date: 7/2/02 9:50 AM Gary, I may be missing the point, but my thoughts are drawn to roto-moulded patio furniture of the kind one can purchase in DIY and other major chain stores..... Rgds Nick. At 10:06 -0700 1/7/02, Gary McInturff wrote: > I am looking for a non-metallic table I can put equipment on >for > pre-pre-compliance checks. Was thinking of Rubbermaid Corp or >the likes, but > first blush says they don't have anything >sufficiently close. > Anybody our there buy rather than make the chamber test tables? > Gary > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
