Hi Group, Looking through the OJEC LVD Standards list, I could not find under EN 60335 and its many parts a particular part that covered a juicer.
Does anyone know which particular part of this standard this product falls under? Also, not having seen this device, if it has blades like a blender, will the Machinery Directive also be applicable? Thanks for sharing your knowledge. Sincerely, Robert R. Loop Engineering Supervisor - Product Safety ph: (256) 837-4411 x313 fax:(256) 721-0144 email: rl...@hnt.wylelabs.com This email transmission is confidential and intended for the addressee only. It may contain privileged and confidential information. If you are not the person or organization to whom it is addressed, you must not copy, distribute, or take any action in reliance upon it. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
