Everyone, This may seem to be a little out of the groups remit but someone may have had experience of this. I am trying to determine the measurement uncertainty associated with calibrating an instrument which is essentially a voltmeter. This is done using a reference voltage source and a second, calibrated voltmeter. Does anyone have any suggestions as to possible sources of uncertainty of measurement in this arrangement? Ideally, someone will know of an on-line spreadsheet which I may use. All measurements are less than 15V DC.
Thanks Ian Gordon _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
