On Wed, 12 Nov 2003 07:43:28 -0500, Bill Flanigan <bflani...@ameritherm.com> wrote:
> I'm embarking on a CE test-cycle under EN61326 and I wonder... > > If I encounter problems under EFT, Burst or Vdips/interruptions, what > mitigating steps are available? If you are so sure that your product complies with the protection requirements of the EMC Directive even if it failed to pass the test, you have chance to use TCF Route instead of the Standard Route. However, I think it may easier and safer to redesign your product so that it can pass the test. Regards, Tom Tomonori Sato <vef00...@nifty.ne.jp> URL: http://member.nifty.ne.jp/tsato/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
