Fischer Custom Communications also have such products, which Agilent was including in their EMC pre-compliance test sets.
Here's the page: http://www.fischercc.com/instrumentation/product_sensors.shtml Barry Rowland Vancouver BC On Wednesday, March 24, 2004, at 04:27 PM, Iain Summers wrote: > > Jacob, I am also measuring BPL in the UK. We have an automatic > Schaffner > loop but it is too noisy to get any good measurments. We have some > manual > tuned loops designed by the University of Herts in the UK by a lecturer > there called Dave Lauder http://dragon.herts.ac.uk/~eleqdml/ If you > contact > him he may give you the spec. > > I would be interested to know what technique you will use. ie how do > you > propose to measure low signal levels in the near field. I am trying to > obtain a sensitive E-field antenna to measure both E and H. I am > doing a > PHD and not complience measurement so I may have a different > requirement to > you. > > I would like to chat to you off-line in more detail if you are > interested. > > Iain > The Open University (UK) > > ----- Original Message ----- > From: "Jacob Schanker" <schan...@frontiernet.net> > To: "EMC-PSTC" <emc-p...@majordomo.ieee.org> > Sent: Wednesday, March 24, 2004 10:39 PM > Subject: Shielded Loop Antenna for HF > > >> >> Fellow Groupees: :) >> >> I am looking for suggestions on sources of shielded loop antennas >> good to > 30 >> MHz. >> >> The usage will be for a study of radiation from a BPL (PLC) system. >> >> Any sources and recommendations, and anecdotal experiences, will be >> appreciated. >> >> Thanks, >> >> Jack >> >> >> Jacob Z. Schanker, P.E. >> Consulting Engineer >> 65 Crandon Way >> Rochester, NY 14618 >> >> Tel: 585 442 3909 >> Fax: 585 442 2182 >> j.schan...@ieee.org >> >> >> >> >> ------------------------------------------- >> This message is from the IEEE EMC Society Product Safety >> Technical Committee emc-pstc discussion list. >> >> Visit our web site at: http://www.ieee-pses.org/ >> >> To cancel your subscription, send mail to: >> majord...@ieee.org >> with the single line: >> unsubscribe emc-pstc >> >> For help, send mail to the list administrators: >> Ron Pickard: emc-p...@hypercom.com >> Dave Heald: emc_p...@symbol.com >> >> For policy questions, send mail to: >> Richard Nute: ri...@ieee.org >> Jim Bacher: j.bac...@ieee.org >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieeecommunities.org/emc-pstc >> >> > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ieee-pses.org/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: emc_p...@symbol.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc